Universal Plate Lifting Clamp
Universal Plate Lifting Clamp, in 4 sizes, 0.75 t to 3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Universal Plate Lifting Clamp
- Size range: 0.75 t to 3 t
- Working load limit: 0.75 to 3 t
- Size range
- 0.75 t to 3 t
- Working load limit
- 0.75 to 3 t
Product description
Plate clamps lift steel plate without drilling it; beam clamps give a lifting point on a steel beam.
Sizes and ratings
4 sizes, 0.75 t to 3 t. Working load limit 0.75 to 3 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose a plate clamp for the plate thickness range it grips and the orientation of the lift; choose a beam clamp for the flange width it adjusts to.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Universal Plate Lifting Clamp |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.75 t to 3 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.75 to 3 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | WLL (t) | Proof load (t) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (kg) | Jaw opening |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LC-UNI-0T75 | 0.75 t | 0.75 | 1.5 | 15 | 105 | 45 | 218 | 30 | 2 | 0-15 mm |
| IH-LR-LC-UNI-1T5 | 1.5 t | 1.5 | 3 | 20 | 170 | 60 | 370 | 60 | 7.4 | 0-20 mm |
| IH-LR-LC-UNI-2T | 2 t | 2 | 4 | 25 | 175 | 68 | 375 | 60 | 7.8 | 0-25 mm |
| IH-LR-LC-UNI-3T | 3 t | 3 | 6 | 30 | 195 | 102 | 418 | 60 | 16 | 0-30 mm |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Jaw opening — Plate thickness range the clamp grips. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the universal plate lifting clamp come in?▾
What is the working load limit?▾
Can one plate clamp handle any plate?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
