Horizontal Plate Lifting Clamp — Type L
Horizontal Plate Lifting Clamp, Type L, in 8 sizes, 0.8 t to 10 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Horizontal plate lifting clamp
- Pattern / standard: L type
- Size range: 0.8 t to 10 t
- Working load limit: 0.8 to 10 t
- Size range
- 0.8 t to 10 t
- Working load limit
- 0.8 to 10 t
- Material
- Carbon steel
- Finish
- Painted
Product description
Horizontal plate clamp for lifting and moving steel plate and sections lying flat. The jaw hooks under the plate edge and the cam closes on it as the sling takes the load.
Sizes and ratings
8 sizes, 0.8 t to 10 t. Rated load 0.8 to 10 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Horizontal clamps lift in pairs or sets, spaced along the plate so it stays level. Choose by rated load and by jaw opening, which must cover the plate thickness. The table gives the rated load as the manufacturer publishes it; confirm on the quotation whether the figure is for one clamp or for the set, and work to the load marked on the clamp.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Horizontal plate lifting clamp |
| Pattern / standard | L type |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.8 t to 10 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.8 to 10 t |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | Size | WLL (t) | Weight (kg) | Jaw opening |
|---|---|---|---|---|
| IH-LR-LC-L-0P8T | 0.8 t | 0.8 | 2 | 0–15 mm |
| IH-LR-LC-L-1T | 1 t | 1 | 4 | 0–20 mm |
| IH-LR-LC-L-1P6T | 1.6 t | 1.6 | 6.5 | 0–25 mm |
| IH-LR-LC-L-2P5T | 2.5 t | 2.5 | 11 | 0–30 mm |
| IH-LR-LC-L-3P2T | 3.2 t | 3.2 | 12.5 | 0–40 mm |
| IH-LR-LC-L-5TJ50 | 5 t, jaw 0–50 mm | 5 | 19 | 0–50 mm |
| IH-LR-LC-L-5TJ80 | 5 t, jaw 50–80 mm | 5 | 20 | 50–80 mm |
| IH-LR-LC-L-10T | 10 t | 10 | 43 | 20–100 mm |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Jaw opening — Plate thickness range the clamp grips. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the horizontal plate lifting clamp come in?▾
What is the working load limit?▾
Is the rated load for one clamp or for a pair?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
From the blog
Written about this range
Lifting & rigging
Vertical and horizontal plate lifting clamps: pairs, jaw range and when to use each
A vertical clamp grips one plate edge-up; horizontal clamps work in pairs to lift plates flat. How each type grips, why the jaw range and the rating basis matter, and where a beam clamp fits in.
5 min read
Lifting & rigging
Steel erection rigging equipment: slings, shackles, clamps and tag lines for steelwork
Erecting structural steel means hundreds of lifts of awkward, heavy, edge-sharp members, often at height and in wind. The rigging kit a steel erection crew needs — chain slings, shackles, beam and plate clamps, lifting points, tag lines — how to choose each, and the rules that apply to multiple lifts, clamps and tag lines.
4 min read
Lifting & rigging
Rigging for plant shutdowns and turnarounds: lifting points, chain blocks and certified kit
A shutdown compresses months of maintenance into weeks, and much of it is lifting: pump motors out, exchanger bundles pulled, valves swapped, in congested units with no room for a crane. The rigging that makes it possible — lifting points, chain blocks, lever hoists, beam clamps and trolleys — how to plan and certify it before the unit comes down, and how to keep the register straight when hundreds of items come and go.
3 min read
Engineers viewing this also looked at
Horizontal Lifting Clamp for Steel Sections — Type LC
Horizontal Plate Lifting Clamp with Roller — Type PDQ
Horizontal Plate Lifting Clamp with Release — Type PPD
Double Plate Lifting Clamp — Type QS
Horizontal Plate Lifting Clamp for Thin Sheet — Type THK / THKS
Horizontal Lifting Clamp with Locking Device — Type TMS
Universal Plate Lifting Clamp
