Horizontal Plate Lifting Clamp with Roller — Type PDQ
Horizontal Plate Lifting Clamp with Roller, Type PDQ, in 6 sizes, 1 t to 12 t per pair. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Horizontal plate lifting clamp
- Pattern / standard: PDQ type
- Size range: 1 t to 12 t per pair
- Working load limit: 1 to 12 t per pair
- Size range
- 1 t to 12 t per pair
- Working load limit
- 1 to 12 t per pair
- Material
- Carbon steel
- Finish
- Painted
Product description
Hook-type horizontal clamp for lifting one plate or a stack of plates, with a roller at the top that the sling runs over, which protects the wire rope and lets the clamps release by themselves when the load is set down.
Sizes and ratings
6 sizes, 1 t to 12 t per pair. Rated load 1 to 12 t for the pair. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Used in pairs under a lifting beam. Choose by rated load and by opening, which must cover the stack thickness. The manufacturer rates the clamps as a pair.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Horizontal plate lifting clamp |
| Pattern / standard | PDQ type |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1 t to 12 t per pair |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 to 12 t per pair |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes| Indus part no. | Size | WLL (t) | Weight (kg) | Jaw opening |
|---|---|---|---|---|
| IH-LR-LC-PDQ-1T | 1 t per pair | 1 | 3 | 0–50 mm |
| IH-LR-LC-PDQ-2T | 2 t per pair | 2 | 5 | 0–60 mm |
| IH-LR-LC-PDQ-3P2T | 3.2 t per pair | 3.2 | 12 | 0–90 mm |
| IH-LR-LC-PDQ-5T | 5 t per pair | 5 | 17 | 0–120 mm |
| IH-LR-LC-PDQ-8T | 8 t per pair | 8 | 25 | 0–130 mm |
| IH-LR-LC-PDQ-12T | 12 t per pair | 12 | — | 0–150 mm |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Jaw opening — Plate thickness range the clamp grips. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the horizontal plate lifting clamp with roller come in?▾
What is the working load limit?▾
Is the rated load for one clamp or for a pair?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
From the blog
Written about this part
Engineers viewing this also looked at
Horizontal Plate Lifting Clamp with Release — Type PPD
Double Plate Lifting Clamp — Type QS
Horizontal Plate Lifting Clamp for Thin Sheet — Type THK / THKS
Horizontal Lifting Clamp with Locking Device — Type TMS
Universal Plate Lifting Clamp
Lifting Beam Clamp
Vertical Plate Lifting Clamp — Type CDH
