Horizontal Lifting Clamp for Steel Sections — Type LC
Horizontal Lifting Clamp for Steel Sections, Type LC, in 3 sizes, 1 t to 3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Horizontal lifting clamp
- Pattern / standard: LC type
- Size range: 1 t to 3 t
- Working load limit: 1 to 3 t
- Size range
- 1 t to 3 t
- Working load limit
- 1 to 3 t
- Material
- Die-forged alloy steel, heat treated
- Finish
- Zinc plated body, painted eye
Product description
Compact horizontal clamp for lifting structural steel sections — H, I, T and angle — by the flange. Die-forged alloy steel, heat treated.
Sizes and ratings
3 sizes, 1 t to 3 t. Rated load 1 to 3 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in. The lettered dimensions refer to the dimension drawing in the gallery.
Choosing a size
Horizontal clamps lift in pairs or sets, spaced along the plate so it stays level. Choose by rated load and by jaw width, which must suit the flange thickness. The table gives the rated load as the manufacturer publishes it; confirm on the quotation whether the figure is for one clamp or for the set, and work to the load marked on the clamp.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Horizontal lifting clamp |
| Pattern / standard | LC type |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1 t to 3 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 to 3 t |
Construction
| Parameter | Value |
|---|---|
| Material | Die-forged alloy steel, heat treated |
| Finish | Zinc plated body, painted eye |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | WLL (t) | B (mm) | D (mm) | H (mm) | h1 (mm) | L (mm) | T (mm) | d (mm) | b1 (mm) | b2 (mm) | h2 (mm) | t (mm) | Weight (kg) | Jaw opening |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LC-LC-1T | 1 t | 1 | 102 | 70 | 100 | 22 | 166 | 32 | 46 | 64 | 42 | 36 | 12 | 2.1 | 1–13 mm |
| IH-LR-LC-LC-2T | 2 t | 2 | 130 | 92 | 132 | 33 | 235 | 40 | 56 | 84 | 56 | 46 | 16 | 4.7 | 3–22 mm |
| IH-LR-LC-LC-3T | 3 t | 3 | 172 | 82 | 178 | 40 | 276 | 44 | 42 | 92 | 70 | 55 | 18 | 8.4 | 12–35 mm |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. h1 — Dimension h1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. T — Dimension T on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. b1 — Dimension b1 on the manufacturer dimension drawing. b2 — Dimension b2 on the manufacturer dimension drawing. h2 — Dimension h2 on the manufacturer dimension drawing. t — Dimension t on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Jaw opening — Plate thickness range the clamp grips. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the horizontal lifting clamp for steel sections come in?▾
What is the working load limit?▾
Is the rated load for one clamp or for a pair?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
From the blog
Written about this part
Engineers viewing this also looked at
Horizontal Plate Lifting Clamp with Roller — Type PDQ
Horizontal Plate Lifting Clamp with Release — Type PPD
Double Plate Lifting Clamp — Type QS
Horizontal Plate Lifting Clamp for Thin Sheet — Type THK / THKS
Horizontal Lifting Clamp with Locking Device — Type TMS
Universal Plate Lifting Clamp
Lifting Beam Clamp
