Horizontal Plate Lifting Clamp with Release — Type PPD
Horizontal Plate Lifting Clamp with Release, Type PPD, in 10 sizes, 0.8 t to 30 t per pair. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Horizontal plate lifting clamp
- Pattern / standard: PPD type
- Size range: 0.8 t to 30 t per pair
- Working load limit: 0.8 to 30 t per pair
- Size range
- 0.8 t to 30 t per pair
- Working load limit
- 0.8 to 30 t per pair
- Material
- Carbon steel, replaceable jaw plate
- Finish
- Painted
Product description
Horizontal plate clamp with a release button that frees the cam after the lift, and a jaw plate that can be replaced when it wears.
Sizes and ratings
10 sizes, 0.8 t to 30 t per pair. Rated load 0.8 to 30 t for the pair. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Used in pairs or sets at a sling angle of 60°; the rated load is for the pair working together. Choose by rated load and by jaw opening, which must cover the plate thickness.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Horizontal plate lifting clamp |
| Pattern / standard | PPD type |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.8 t to 30 t per pair |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.8 to 30 t per pair |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel, replaceable jaw plate |
| Finish | Painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Size | WLL (t) | Weight (kg) | Jaw opening |
|---|---|---|---|---|
| IH-LR-LC-PPD-0P8T | 0.8 t per pair | 0.8 | 2.5 | 0–25 mm |
| IH-LR-LC-PPD-1T | 1 t per pair | 1 | 3.5 | 0–30 mm |
| IH-LR-LC-PPD-1P6T | 1.6 t per pair | 1.6 | 4 | 0–30 mm |
| IH-LR-LC-PPD-2T | 2 t per pair | 2 | 5 | 0–40 mm |
| IH-LR-LC-PPD-3P2T | 3.2 t per pair | 3.2 | 6 | 0–45 mm |
| IH-LR-LC-PPD-5T | 5 t per pair | 5 | 7.5 | 0–50 mm |
| IH-LR-LC-PPD-8T | 8 t per pair | 8 | 10.5 | 0–80 mm |
| IH-LR-LC-PPD-10T | 10 t per pair | 10 | 33 | 0–120 mm |
| IH-LR-LC-PPD-16T | 16 t per pair | 16 | 50 | 50–150 mm |
| IH-LR-LC-PPD-30T | 30 t per pair | 30 | 108 | 100–270 mm |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Jaw opening — Plate thickness range the clamp grips. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the horizontal plate lifting clamp with release come in?▾
What is the working load limit?▾
Is the rated load for one clamp or for a pair?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
From the blog
Written about this part
Lifting & rigging
Vertical and horizontal plate lifting clamps: pairs, jaw range and when to use each
A vertical clamp grips one plate edge-up; horizontal clamps work in pairs to lift plates flat. How each type grips, why the jaw range and the rating basis matter, and where a beam clamp fits in.
5 min read
Lifting & rigging
Steel erection rigging equipment: slings, shackles, clamps and tag lines for steelwork
Erecting structural steel means hundreds of lifts of awkward, heavy, edge-sharp members, often at height and in wind. The rigging kit a steel erection crew needs — chain slings, shackles, beam and plate clamps, lifting points, tag lines — how to choose each, and the rules that apply to multiple lifts, clamps and tag lines.
4 min read
Engineers viewing this also looked at
Double Plate Lifting Clamp — Type QS
Horizontal Plate Lifting Clamp for Thin Sheet — Type THK / THKS
Horizontal Lifting Clamp with Locking Device — Type TMS
Universal Plate Lifting Clamp
Lifting Beam Clamp
Vertical Plate Lifting Clamp — Type CDH
Horizontal Plate Lifting Clamp
