Texas Pneumatic Tools Hydraulic Hoses

Texas Pneumatic Tools Hydraulic Hoses: 11 part numbers.
Product description
Texas Pneumatic Tools Hydraulic Hoses: 11 part numbers.
Specification
- Type: Hydraulic Hose
- Part numbers: 11
Sizes and part numbers
The Sizes & Part Numbers tab lists every Texas Pneumatic Tools part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Texas Pneumatic Tools part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
11 sizes- Texas Pneumatic Tools part no.TX-22000
- Description
- Hydraulic Hose, 2000 Psi, 2 Inch Size
- Texas Pneumatic Tools part no.TX-122000-1212
- Description
- Hydraulic Hose, 1/2 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-1214
- Description
- Hydraulic Hose, 1/2 X 1/4 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-1238
- Description
- Hydraulic Hose, 1/2 x 3/8 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-3412
- Description
- Hydraulic Hose, 3/4 x 1/2 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-1212-8
- Description
- Hydraulic Hose, 8 Feet Length, 1/2 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-1238-8
- Description
- Hydraulic Hose, 1/2 x 3/8 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-12988
- Description
- Hydraulic Hose, 1/2 Inch MPT
Show all 11 sizesShow fewer sizes
- Texas Pneumatic Tools part no.TX-122000-3412-4.5
- Description
- Hydraulic Hose, 3/4 x 1/2 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-121087
- Description
- Hydraulic Hose, 1/2 Inch MPT
- Texas Pneumatic Tools part no.TX-122000-1212-10
- Description
- Hydraulic Hose, 10 Feet Length, 1/2 Inch MPT
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What is the Texas Pneumatic Tools Hydraulic Hoses used for?▾
Which sizes does the Texas Pneumatic Tools Hydraulic Hoses come in?▾
What does part number TX-122000-1212-8 of the Texas Pneumatic Tools Hydraulic Hoses cover?▾
What is the working pressure of the Texas Pneumatic Tools Hydraulic Hoses?▾
What temperatures and fluids suit the Texas Pneumatic Tools Hydraulic Hoses?▾
Which standard does the Texas Pneumatic Tools Hydraulic Hoses meet?▾
Which fittings and ferrules do I use on the Texas Pneumatic Tools Hydraulic Hoses?▾
How should I route the Texas Pneumatic Tools Hydraulic Hoses and what is the minimum bend radius?▾
How do I match the size of the Texas Pneumatic Tools Hydraulic Hoses to my old hose?▾
Texas Pneumatic Tools Hydraulic Hoses or Enerpac HT Series Hydraulic Hoses: which should I choose?▾
Where does the Texas Pneumatic Tools Hydraulic Hoses come from and how is it shipped?▾
Do you stock the Texas Pneumatic Tools Hydraulic Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read







