Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses

Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses, 3/4" to 1 1/2": 8 part numbers.
Product description
Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses, 3/4" to 1 1/2": 8 part numbers.
Specification
- Type: Hydraulic Hose
- Size range: 3/4" to 1 1/2"
- Pressure stated by the maker: 150 to 300 psi (10 to 21 bar), by size
- Temperature: -40°F to +275°F
- Cover Material: Synthetic Rubber
- Part numbers: 8
Sizes and part numbers
The Sizes & Part Numbers tab lists every Weatherhead part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Weatherhead part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Abrasion Resistant | Standard |
| Application | Suction Applications For Hydraulics, Crude Fuel And Lubricating Oils, Gasoline, Air, Water And Chemical Transfer. |
| Color | Black |
| Compatible Chemicals | Air, Automatic Transmission Fluid, Diesel Fuel, Ethylene Glycol, Fresh Water, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Kerosene, Lithium Grease, Lubricated Air, Mi |
| Conductivity | Conductive |
| Construction | Multi Braid |
| Cover Material | Synthetic Rubber |
| Factory Crimp | Yes |
| Hose Color | Black |
| Hose Configuration | Bulk Hose |
| Hose Cover Material | Neoprene |
| Hose Fittings | U, S, 039 K, Z, 430 U |
| Hose Tube Material | Synthetic Rubber |
| Inner Tube Material | CPE |
| Lay Line Style | Ink Wheel |
| Max. Temp. | 275°F |
| Max. Working Temp. | 275°F |
| Min. Bend Radius | 3" |
| Notes | When Hose Is Used In Conjunction With Band Clamps, Operating Pressure Shall Not Exceed 5 Bar [70 psi] |
| Safety Factor | 4:1 |
| Temp. | -40°F to +275°F |
| Tube Material | Synthetic Rubber |
| Type | Crimped |
| Wheel Color | Black |
Shipping & lead time
Sizes & part numbers
8 sizes- Weatherhead part no.H03916-100
- Description
- Hydraulic Hose, 250 psi, 1 Inch Hose I.D., 1 1/2 Inch Hose O.D., 100 ft Hose Lg
- Hose bore
- -16 · 1"
- Min burst (bar)
- 68
- Working pressure (bar)
- 17
- Weatherhead part no.H03916-150
- Description
- Hydraulic Hose, 250 psi, 1 Inch Hose I.D., 1 1/2 Inch Hose O.D., 150 ft Hose Lg
- Hose bore
- -16 · 1"
- Min burst (bar)
- 68
- Working pressure (bar)
- 17
- Weatherhead part no.H03912-100
- Description
- Hydraulic Hose, 300 psi, 3/4 Inch Hose I.D., 1 9/32 Inch Hose O.D., 100 ft Hose Lg
- Hose bore
- -12 · 3/4"
- Min burst (bar)
- 84
- Working pressure (bar)
- 21
- Weatherhead part no.H03912-150
- Description
- Hydraulic Hose, 300 psi, 3/4 Inch Hose I.D., 1 9/32 Inch Hose O.D., 150 ft Hose Lg
- Hose bore
- -12 · 3/4"
- Min burst (bar)
- 84
- Working pressure (bar)
- 21
- Weatherhead part no.H03924-100
- Description
- Hydraulic Hose, 150 psi, 1 1/2 Inch Hose I.D., 2 5/64 Inch Hose O.D., 100 ft Hose Lg
- Hose bore
- -24 · 1 1/2"
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
- Weatherhead part no.H03924-150
- Description
- Hydraulic Hose, 150 psi, 1 1/2 Inch Hose I.D., 2 5/64 Inch Hose O.D., 150 ft Hose Lg
- Hose bore
- -24 · 1 1/2"
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
- Weatherhead part no.H03920-100
- Description
- Hydraulic Hose, 200 psi, 1 1/4 Inch Hose I.D., 1 53/64 Inch Hose O.D., 100 ft Hose Lg
- Hose bore
- -20 · 1 1/4"
- Min burst (bar)
- 57
- Working pressure (bar)
- 14
- Weatherhead part no.H03920-150
- Description
- Hydraulic Hose, 200 psi, 1 1/4 Inch Hose I.D., 1 53/64 Inch Hose O.D., 150 ft Hose Lg
- Hose bore
- -20 · 1 1/4"
- Min burst (bar)
- 57
- Working pressure (bar)
- 14
Description — What this part number is, as the manufacturer lists it. Min burst — Minimum burst pressure. A test figure, never a working limit — never select on it.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses used for?▾
Which sizes does the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses come in?▾
What does part number H03924-100 of the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses cover?▾
What is the working pressure of the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses?▾
What temperatures and fluids suit the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses?▾
Which standard does the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses meet?▾
Which fittings and ferrules do I use on the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses?▾
How should I route the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses and what is the minimum bend radius?▾
What applications is the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses recommended for?▾
Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses or Weatherhead Danfoss H145R Series: which should I choose?▾
Where is the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses made and what is its HS code?▾
Do you stock the Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read







