Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses

Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses, 1/4" to 1": 6 part numbers.
Product description
Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses, 1/4" to 1": 6 part numbers.
Specification
- Type: Hydraulic Hose
- Size range: 1/4" to 1"
- Temperature: -40°F to +212°F
- Cover Material: Bruiser
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Weatherhead part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Weatherhead part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Abrasion Resistant | Ultra |
| Application | Refined Petroleum Based Fluids |
| Color | Black |
| Compatible Chemicals | Air, Automatic Transmission Fluid, Diesel Fuel, Ethylene Glycol, Fresh Water, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Kerosene, Lithium Grease, Lubricated Air, Mi |
| Compatible Fittings | Z |
| Construction | 1 Ply Braid |
| Cover Color | Black |
| Cover Material | Bruiser |
| Hose Color | Black |
| Hose Configuration | Bulk Hose |
| Hose Cover Material | UHMW PE |
| Hose Fittings | Z |
| Hose Tube Material | Nitrile |
| Impulse Cycle Life | 200000 Cycles |
| Inner Tube Material | Synthetic Rubber |
| Lay Line Style | Ink Transfer |
| Min. Temp. | -40°F |
| Min. Working Temp. | -40°F |
| Safety Factor | 4:1 |
| Temp. | -40°F to +212°F |
| Tube Material | Synthetic Rubber |
| Type | Crimped |
Shipping & lead time
Sizes & part numbers
6 sizes- Weatherhead part no.H145R16-250R
- Description
- Hydraulic Hose, 3045 psi, 1 Inch Hose I.D., 1 15/32 Inch Hose O.D., 250 ft Hose Lg
- Hose bore
- -16 · 1"
- Min bend radius (mm)
- 150.1
- Weatherhead part no.H145R08-250R
- Description
- Braided Hose Id 0.5 Inch Od 0.85 Inch Length 250 Foot
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 89.9
- Weatherhead part no.H145R04-250R
- Description
- Hydraulic Hose, 3045 psi, 1/4 Inch Hose I.D., 25/32 Inch Hose O.D., 250 ft Hose Lg
- Hose bore
- -04 · 1/4"
- Min bend radius (mm)
- 50
- Weatherhead part no.H145R12-250R
- Description
- Hydraulic Hose, 3045 psi, 3/4 Inch Hose I.D., 25/32 Inch Hose O.D., 250 ft Hose Lg
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 119.9
- Weatherhead part no.H145R06-250R
- Description
- Hydraulic Hose, 3045 psi, 3/8 Inch Hose I.D., 25/32 Inch Hose O.D., 250 ft Hose Lg
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 65
- Weatherhead part no.H145R10-250R
- Description
- Hydraulic Hose, 3045 psi, 5/8 Inch Hose I.D., 25/32 Inch Hose O.D., 250 ft Hose Lg
- Hose bore
- -10 · 5/8"
- Min bend radius (mm)
- 101.6
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses used for?▾
Which sizes does the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses come in?▾
What does part number H145R12-250R of the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses cover?▾
What is the working pressure of the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses?▾
What temperatures and fluids suit the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses?▾
Which standard does the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses meet?▾
Which fittings and ferrules do I use on the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses?▾
How should I route the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses and what is the minimum bend radius?▾
What applications is the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses recommended for?▾
Weatherhead Danfoss H145R Series or Weatherhead Danfoss H039 Series Rubber Hydraulic Braided Hoses: which should I choose?▾
Where is the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses made and what is its HS code?▾
Do you stock the Weatherhead Danfoss H145R Series Rubber Hydraulic Braided Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read







