Skip to content
SUN HYDRAULICSIH-SUN-RBAD

Sun Hydraulics Dual, Direct-Acting Relief Valve, Pilot Capacity — RBAD

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RBAD dual direct-acting pilot relief valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics RBAD dual direct-acting pilot relief valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics dual direct-acting pilot relief valve: RBAD, series 1, .25 gpm (1 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Dual Direct-Acting Pilot Relief Valve
  • Capacity: .25 gpm (1 L/min)
  • Cavity: T-11A
Valve function
Dual Direct-Acting Pilot Relief Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot relief cartridge with back-to-back checks, so one adjustment remotely controls two pilot-operated valves, or provide thermal relief at each end of a cylinder or motor. The checks stop the two controlled valves talking to each other.

Sizes and cavities

Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:

  • RBAD — series 1, T-11A cavity, .25 gpm (1 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum leakage: 5 drops/min. (0,3 cc/min)
  • Typical response time: 2 ms

Configuration options

The letters after the base model code choose these options (shown for RBAD; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
  • Setting range: A — 25 - 3000 psi (1,7 - 210 bar), 1000 psi (70 bar) Standard Setting, B — 25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting, C — 25 - 6000 psi (1,7 - 420 bar), 1000 psi (70 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, W — 25 - 4500 psi (1,7 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be L; If the modifier is /LH, the control must be L.

Selection notes

  • One adjustment controls two valves.
  • Pressure at port 3 adds directly to the setting.
  • Suitable for load-holding applications.

Where it is used

Cross-port thermal relief and paired remote control of pilot-operated valves.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RBADLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Performance

ParameterValue
Capacity.25 gpm (1 L/min)
Setting rangeA — 25 - 3000 psi (1,7 - 210 bar), 1000 psi (70 bar) Standard Setting, B — 25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting, C — 25 - 6000 psi (1,7 - 420 bar), 1000 psi (70 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, W — 25 - 4500 psi (1,7 - 315 bar), 1000 psi (70 bar) Standard Setting
Max leakage5 drops/min. (0,3 cc/min)

Identification

ParameterValue
Valve functionDual Direct-Acting Pilot Relief Valve
Series (frame sizes)1
CavityT-11A

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at