Sun Hydraulics Low-Pressure-Range, Direct-Acting Relief Valve — RGFA

Sun Hydraulics low-pressure direct-acting relief valve: RGFA, series 2, 50 gpm (200 L/min), T-3A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Low-Pressure Direct-Acting Relief Valve
- Capacity: 50 gpm (200 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-3A
- Valve function
- Low-Pressure Direct-Acting Relief Valve
- Series (frame sizes)
- 2
- Cavity
- T-3A
Product description
A direct-acting relief cartridge built for low settings. When pressure at port 1 reaches the setting it opens to tank at port 2 and throttles flow to limit the pressure rise.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- RGFA — series 2, T-3A cavity, 50 gpm (200 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 3 in³/min.@1000 psi (50 cc/min.@70 bar)
- Typical response time: 10 ms
Configuration options
The letters after the base model code choose these options (shown for RGFA; a size may add or drop a choice):
- Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
- Setting range: C — 18 - 50 psi (1,2 - 3,5 bar), 50 psi (3,5 bar) Standard Setting, E — 20 - 75 psi (1,4 - 5 bar), 75 psi (5 bar) Standard Setting, F — 35 - 80 psi (2,4 -5,5 bar), 80 psi (5,5 bar) Standard Setting, G — 30 - 150 psi (2 - 10,5 bar), 150 psi (10,5 bar) Standard Setting
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: If the modifier is /AP, the control must be C or L; If the seal is E, the control must be C,K,L or O.
Selection notes
- Not for load-holding duty.
- Accepts full pressure at port 2.
Where it is used
Low-pressure circuits: lubrication and cooling loops, charge and pilot supplies, and return-line protection.
Installation and seal kits
Valve hex 1 1/8 in. (28,6 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RGFALCN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Low-Pressure Direct-Acting Relief Valve |
| Series (frame sizes) | 2 |
| Cavity | T-3A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 50 gpm (200 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | C — 18 - 50 psi (1,2 - 3,5 bar), 50 psi (3,5 bar) Standard Setting, E — 20 - 75 psi (1,4 - 5 bar), 75 psi (5 bar) Standard Setting, F — 35 - 80 psi (2,4 -5,5 bar), 80 psi (5,5 bar) Standard Setting, G — 30 - 150 psi (2 - 10,5 bar), 150 psi (10,5 bar) Standard Setting |
| Max leakage | 3 in³/min.@1000 psi (50 cc/min.@70 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/8 in. (28,6 mm) |
| Installation torque | 45 - 50 lbf ft (61 - 68 Nm) |
| Seal kits | series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006 |
| Weight | .55 lb (0,25 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.RGFA
- Series
- 2
- Cavity
- T-3A
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Low-Pressure-Range, Direct-Acting Relief Valve (RGFA) and what does it do?▾
How do I read the Sun model code for the Sun Low-Pressure-Range, Direct-Acting Relief Valve (RGFA)?▾
What sizes and flow capacities does the Sun Low-Pressure-Range, Direct-Acting Relief Valve come in?▾
What pressure and setting range does the Sun Low-Pressure-Range, Direct-Acting Relief Valve have?▾
Which seal and material options does the Sun Low-Pressure-Range, Direct-Acting Relief Valve come with?▾
How is the Sun Low-Pressure-Range, Direct-Acting Relief Valve adjusted, and which control options are offered?▾
Which seal kit fits the Sun Low-Pressure-Range, Direct-Acting Relief Valve (RGFA)?▾
Which cavity and installation torque does the Sun Low-Pressure-Range, Direct-Acting Relief Valve need?▾
Where is the Sun Low-Pressure-Range, Direct-Acting Relief Valve used?▾
How does the Sun Low-Pressure-Range, Direct-Acting Relief Valve differ from the Sun Direct-Acting Relief Valve?▾
Direct-acting or pilot-operated relief — which one on the Sun Low-Pressure-Range, Direct-Acting Relief Valve?▾
Do you stock the Sun Low-Pressure-Range, Direct-Acting Relief Valve in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








