Sun Hydraulics Pilot-Operated, Balanced Piston Relief Valve — RPCC, RPEC, RPGC, RPIC, RPKC, Series 0 to 4

Sun Hydraulics pilot-operated balanced piston relief valve: RPCC, RPEC, RPGC, RPIC, RPKC, series 0 to 4, 12 gpm to 200 gpm (45 L/min to 760 L/min), T-162A, T-10A, T-3A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-Operated Balanced Piston Relief Valve
- Capacity: 12 gpm to 200 gpm (45 L/min to 760 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-162A, T-10A, T-3A, T-16A, T-18A
- Valve function
- Pilot-Operated Balanced Piston Relief Valve
- Series (frame sizes)
- 0 to 4
- Cavity
- T-162A, T-10A, T-3A, T-16A, T-18A
Product description
A normally closed, pilot-operated relief cartridge with a balanced piston main stage. A small pilot stage senses pressure at port 1; when it reaches the setting the main stage opens to tank at port 2 and throttles flow to regulate pressure. It holds its setting closely as flow increases, runs smooth and quiet, and responds moderately fast.
Sizes and cavities
Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:
- RPCC — series 0, T-162A cavity, 12 gpm (45 L/min), 0-series
- RPEC — series 1, T-10A cavity, 25 gpm (95 L/min)
- RPGC — series 2, T-3A cavity, 50 gpm (200 L/min)
- RPIC — series 3, T-16A cavity, 100 gpm (380 L/min)
- RPKC — series 4, T-18A cavity, 200 gpm (760 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 2 in³/min.@1000 psi (30 cc/min.@70 bar), 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar)
- Typical response time: 10 ms
Configuration options
The letters after the base model code choose these options (shown for RPEC; a size may add or drop a choice):
- Control: L — Standard Screw Adjustment, C — Tamper Resistant - Factory Set, K — Handknob, O — Handknob with Panel Mount, W — Hex Wrench Adjustment, Y — Tri-Grip Handknob, F — Hex Head Screw with Locknut, J — Capped Screw Adjustment, M — Capped Screw Adjustment with Lockwire Holes, Q — Capped and Lockwired, R — Lockwired Screw Adjustment
- Setting range: A — 100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting, W — 150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting, C — 150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting, N — 60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting, Q — 60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, G — 60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting, H — 30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting, K — 75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting, P — 40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting, V — 150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
- Seal material: N — Buna-N, L — Buna (low temp), V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be C or L; If the modifier is /LH, the control must be C or L; If the seal is E, the control must be C,K,L,R,O,W or Y.
Selection notes
- Low pressure rise from cracking to full flow.
- Accepts full pressure at port 2; allow for spool leakage if used for cross-port relief.
- Sun's 2-port relief cartridges of one frame size share one cavity and flow path.
Where it is used
Main system relief and pressure regulation on power units, presses and mobile machines.
Installation and seal kits
Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990162007, EPDM: 990162014, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, EPDM: 990018014, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RPECLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-Operated Balanced Piston Relief Valve |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-162A, T-10A, T-3A, T-16A, T-18A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 12 gpm to 200 gpm (45 L/min to 760 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting, W — 150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting, C — 150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting, N — 60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting, Q — 60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Se |
| Max leakage | 2 in³/min.@1000 psi (30 cc/min.@70 bar), 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | L — Standard Screw Adjustment, C — Tamper Resistant - Factory Set, K — Handknob, O — Handknob with Panel Mount, W — Hex Wrench Adjustment, Y — Tri-Grip Handknob, F — Hex Head Screw with Locknut, J — Capped Screw Adjustment, M — Capped Screw Adjustment with Lockwire Holes, Q — Capped and Lockwired, R — Lockwired Screw Adjustment |
| Seal material | N — Buna-N, L — Buna (low temp), V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990162007, EPDM: 990162014, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, EPDM: 990018014, Polyurethane: 990018002, Viton: 990018006 |
| Weight | .20 lb (0,10 kg) to 2.50 lb (1,15 kg) |
Shipping & lead time
Sizes & part numbers
5 sizes- Sun Hydraulics part no.RPCC
- Description
- 0-Series
- Series
- 0
- Cavity
- T-162A
- Capacity
- 12 gpm / 45 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPEC
- Description
- Standard
- Series
- 1
- Cavity
- T-10A
- Capacity
- 25 gpm / 95 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPGC
- Description
- Standard
- Series
- 2
- Cavity
- T-3A
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPIC
- Description
- Standard
- Series
- 3
- Cavity
- T-16A
- Capacity
- 100 gpm / 380 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPKC
- Description
- Standard
- Series
- 4
- Cavity
- T-18A
- Capacity
- 200 gpm / 760 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Pilot-Operated, Balanced Piston Relief Valve (RPCC, RPEC, RPGC and others) and what does it do?▾
How do I read the Sun model code for the Sun Pilot-Operated, Balanced Piston Relief Valve (RPCC, RPEC, RPGC and others)?▾
What sizes and flow capacities does the Sun Pilot-Operated, Balanced Piston Relief Valve come in?▾
What pressure and setting range does the Sun Pilot-Operated, Balanced Piston Relief Valve have?▾
Which seal and material options does the Sun Pilot-Operated, Balanced Piston Relief Valve come with?▾
How is the Sun Pilot-Operated, Balanced Piston Relief Valve adjusted, and which control options are offered?▾
Which seal kit fits the Sun Pilot-Operated, Balanced Piston Relief Valve (RPCC, RPEC, RPGC and others)?▾
Which cavity and installation torque does the Sun Pilot-Operated, Balanced Piston Relief Valve need?▾
Where is the Sun Pilot-Operated, Balanced Piston Relief Valve used?▾
How does the Sun Pilot-Operated, Balanced Piston Relief Valve differ from the Sun Ventable, Pilot-Operated, Balanced Piston Relief Valve?▾
Can the Sun Pilot-Operated, Balanced Piston Relief Valve be used as a cross-port relief?▾
Can I buy the Sun Pilot-Operated, Balanced Piston Relief Valve from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








