Skip to content
SUN HYDRAULICSIH-SUN-RBAP

Sun Hydraulics Electro-Proportional Relief Valve, Pilot Capacity — RBAP

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RBAP electro-proportional pilot relief valve, series P, T-8A cavity — dimension drawing
VIEW 01·Sun Hydraulics RBAP electro-proportional pilot relief valve, series P, T-8A cavity — dimension drawing
1 / 3

Sun Hydraulics electro-proportional pilot relief valve: RBAP, series P, .25 gpm (1 L/min), T-8A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional Pilot Relief Valve
  • Capacity: .25 gpm (1 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-8A
Valve function
Electro-Proportional Pilot Relief Valve
Series (frame sizes)
P
Cavity
T-8A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-stage, direct-acting relief cartridge set by a proportional solenoid. The analog signal to the coil sets the pressure at which the poppet lifts, giving step-less electronic adjustment within the chosen range. It fits the T-8A cavity, so it can pilot Sun's main-stage pressure elements.

Sizes and cavities

Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:

  • RBAP — series P, T-8A cavity, .25 gpm (1 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 1.5 in³/min. (25 cc/min)
  • Reseat: >85% of setting

Configuration options

The letters after the base model code choose these options (shown for RBAP; a size may add or drop a choice):

  • Control: X — No Manual Override, E — Twist (Extended) Manual Override, L — Manual Override - Adjustable, T — Tuning Adjustment, M — Manual Override
  • Setting range: A — 300 - 3000 psi (20 - 210 bar), B — 150 - 1500 psi (10,5 - 105 bar), D — 50 - 750 psi (3,5 - 50 bar), W — 500 - 5000 psi (35 - 350 bar)
  • Seal material: N — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Option rules: EPDM seals are not allowed on modifier /LH; If the coil is in this group (HN24AA, HN24AB), the control must be M or X; If the modifier is /LH, the control must be X; If the seal is E, the control must be E,L,M,T or X.

Selection notes

  • Pilot-flow capacity only.
  • Coil ordered separately or as configured.
  • Manual override available on the solenoid.

Where it is used

Electronic pressure control of main-stage reliefs, reducing and sequence valves, with an XMD or other proportional driver.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990208007, EPDM: 990008014, Viton: 990208006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RBAPXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries P: Buna: 990208007, EPDM: 990008014, Viton: 990208006

Identification

ParameterValue
Valve functionElectro-Proportional Pilot Relief Valve
Series (frame sizes)P
CavityT-8A

Performance

ParameterValue
Capacity.25 gpm (1 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 300 - 3000 psi (20 - 210 bar), B — 150 - 1500 psi (10,5 - 105 bar), D — 50 - 750 psi (3,5 - 50 bar), W — 500 - 5000 psi (35 - 350 bar)
Max leakage1.5 in³/min. (25 cc/min)

Configuration

ParameterValue
Control / adjustmentX — No Manual Override, E — Twist (Extended) Manual Override, L — Manual Override - Adjustable, T — Tuning Adjustment, M — Manual Override
Seal materialN — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM
Material / coating/LH — Mild Steel, Zinc-Nickel

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at