Skip to content
SUN HYDRAULICSIH-SUN-RB-ACE

Sun Hydraulics Direct-Acting Relief Valve, Pilot Capacity — RBAA, RBAC, RBAE, Series 1, 2, P

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RBAC direct-acting pilot relief valve, series 1, T-10A cavity — dimension drawing
VIEW 01·Sun Hydraulics RBAC direct-acting pilot relief valve, series 1, T-10A cavity — dimension drawing
1 / 3

Sun Hydraulics direct-acting pilot relief valve: RBAA, RBAC, RBAE, series 1, 2, P, .25 gpm to 2.5 gpm (1 L/min to 10 L/min), T-10A, T-3A, T-8A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Direct-Acting Pilot Relief Valve
  • Capacity: .25 gpm to 2.5 gpm (1 L/min to 10 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-10A, T-3A, T-8A
Valve function
Direct-Acting Pilot Relief Valve
Series (frame sizes)
1, 2, P
Cavity
T-10A, T-3A, T-8A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A small direct-acting relief cartridge used to set other pilot-operated valves remotely, or as a thermal relief. Its capacity is limited to pilot flow, so it works with higher flow main-stage valves rather than on its own.

Sizes and cavities

Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:

  • RBAC — series 1, T-10A cavity, .25 gpm (1 L/min)
  • RBAA — series 2, T-3A cavity, .5 gpm (2 L/min)
  • RBAE — series P, T-8A cavity, 2.5 gpm (10 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min), 15 drops/min. (1 cc/min)
  • Typical response time: 2 ms

Configuration options

The letters after the base model code choose these options (shown for RBAC; a size may add or drop a choice):

  • Control: L — Standard Screw Adjustment, C — Tamper Resistant - Factory Set, J — Capped Screw Adjustment, K — Handknob, O — Handknob with Panel Mount, F — Hex Head Screw with Locknut, M — Capped Screw Adjustment with Lockwire Holes, Q — Capped and Lockwired, T — Tamper Proof - Factory Set, W — Hex Wrench Adjustment, Y — Tri-Grip Handknob
  • Setting range: A — 25 - 3000 psi (1,7 - 210 bar), 1000 psi (70 bar) Standard Setting, W — 25 - 4500 psi (1,7 - 315 bar), 1000 psi (70 bar) Standard Setting, B — 25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting, C — 25 - 6000 psi (1,7 - 420 bar), 1000 psi (70 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be C or L; If the modifier is /LH, the control must be L; If the seal is E, the control must be C,K,L,O,W or Y.

Selection notes

  • Pilot-flow capacity only.
  • Back-pressure on the tank port adds directly to the setting.
  • Suitable for load-holding applications.

Where it is used

Remote pressure setting of pilot-operated reliefs, reducing and sequence valves, and thermal relief on trapped actuator volumes.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006; series P: Buna: 990608007, EPDM: 990608014, Polyurethane: 990008002, Viton: 990608006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RBACLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionDirect-Acting Pilot Relief Valve
Series (frame sizes)1, 2, P
CavityT-10A, T-3A, T-8A

Performance

ParameterValue
Capacity.25 gpm to 2.5 gpm (1 L/min to 10 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 25 - 3000 psi (1,7 - 210 bar), 1000 psi (70 bar) Standard Setting, W — 25 - 4500 psi (1,7 - 315 bar), 1000 psi (70 bar) Standard Setting, B — 25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting, C — 25 - 6000 psi (1,7 - 420 bar), 1000 psi (70 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
Max leakage5 drops/min. (0,3 cc/min), 15 drops/min. (1 cc/min)

Configuration

ParameterValue
Control / adjustmentL — Standard Screw Adjustment, C — Tamper Resistant - Factory Set, J — Capped Screw Adjustment, K — Handknob, O — Handknob with Panel Mount, F — Hex Head Screw with Locknut, M — Capped Screw Adjustment with Lockwire Holes, Q — Capped and Lockwired, T — Tamper Proof - Factory Set, W — Hex Wrench Adjustment, Y — Tri-Grip Handknob
Seal materialN — Buna-N, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006; series P: Buna: 990608007, EPDM: 990608014, Polyurethane: 990008002, Viton: 990608006
Weight.30 lb (0,15 kg) to .50 lb (0,25 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at