Sun Hydraulics Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve — RPGD, RPID, RPKD, Series 2 to 4

Sun Hydraulics air-controlled pilot-operated relief valve, 20:1 pilot ratio: RPGD, RPID, RPKD, series 2 to 4, 50 gpm to 200 gpm (200 L/min to 760 L/min), T-3A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Air-Controlled Pilot-Operated Relief Valve
- Capacity: 50 gpm to 200 gpm (200 L/min to 760 L/min)
- Max operating pressure: 2000 psi (140 bar)
- Cavity: T-3A, T-16A, T-18A
- Valve function
- Air-Controlled Pilot-Operated Relief Valve
- Series (frame sizes)
- 2 to 4
- Cavity
- T-3A, T-16A, T-18A
Product description
A pilot-operated relief whose setting comes from compressed air acting on a diaphragm instead of an adjustable spring. Air enters through a port in the cartridge's hex end, so the hydraulic relief pressure can be set and changed remotely from a pneumatic regulator.
Sizes and cavities
Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:
- RPGD — series 2, T-3A cavity, 50 gpm (200 L/min)
- RPID — series 3, T-16A cavity, 100 gpm (380 L/min)
- RPKD — series 4, T-18A cavity, 200 gpm (760 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Pilot ratio: 20:1
- Maximum operating pressure: 2000 psi (140 bar)
- Maximum leakage: 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar)
- Typical response time: 10 ms
Configuration options
The letters after the base model code choose these options (shown for RPKD; a size may add or drop a choice):
- Control: B — External 4-SAE Port
- Seal material: N — Buna-N, V — Viton
Selection notes
- Hydraulic setting rises with air pressure according to the pilot ratio shown.
- Lower maximum operating pressure than spring-set reliefs — check the rating.
Where it is used
Tension, clamping and pressing circuits where pressure is set from a pneumatic control panel.
Installation and seal kits
Valve hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 2: Buna: 990203007, Polyurethane: 990003002, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RPKDBBN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 2: Buna: 990203007, Polyurethane: 990003002, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006 |
| Weight | .50 lb (0,25 kg) to 2.50 lb (1,15 kg) |
Performance
| Parameter | Value |
|---|---|
| Capacity | 50 gpm to 200 gpm (200 L/min to 760 L/min) |
| Max operating pressure | 2000 psi (140 bar) |
| Pilot ratio | 20:1 |
| Max leakage | 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Air-Controlled Pilot-Operated Relief Valve |
| Series (frame sizes) | 2 to 4 |
| Cavity | T-3A, T-16A, T-18A |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | B — External 4-SAE Port |
| Seal material | N — Buna-N, V — Viton |
Shipping & lead time
Sizes & part numbers
3 sizes- Sun Hydraulics part no.RPGD
- Series
- 2
- Cavity
- T-3A
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 2000 psi / 140 bar
- Sun Hydraulics part no.RPID
- Series
- 3
- Cavity
- T-16A
- Capacity
- 100 gpm / 380 L/min
- Max pressure
- 2000 psi / 140 bar
- Sun Hydraulics part no.RPKD
- Series
- 4
- Cavity
- T-18A
- Capacity
- 200 gpm / 760 L/min
- Max pressure
- 2000 psi / 140 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve (RPGD, RPID, RPKD) and what does it do?▾
How do I read the Sun model code for the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve (RPGD, RPID, RPKD)?▾
What sizes and flow capacities does the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve come in?▾
What pressure and setting range does the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve have?▾
Which seal and material options does the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve come with?▾
How is the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve adjusted, and which control options are offered?▾
Which seal kit fits the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve (RPGD, RPID, RPKD)?▾
Which cavity and installation torque does the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve need?▾
Where is the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve used?▾
How does the Sun RPGD valve differ from the Sun Air-Controlled, Pilot-Operated, Balanced Piston Sequence Valve?▾
How is the setting controlled on the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve?▾
Is the Sun Air-Controlled, Pilot-Operated, Balanced Piston Relief Valve in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








