Skip to content
SUN HYDRAULICSIH-SUN-RD-A3

Sun Hydraulics Non-Adjustable Direct-Acting Relief Valve — RDDA3, RDFA3, Series 1 to 2

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RDDA3 non-adjustable direct-acting relief valve, series 1, T-10A cavity — dimension drawing
VIEW 01·Sun Hydraulics RDDA3 non-adjustable direct-acting relief valve, series 1, T-10A cavity — dimension drawing
1 / 3

Sun Hydraulics non-adjustable direct-acting relief valve: RDDA3, RDFA3, series 1 to 2, 25 gpm to 50 gpm (95 L/min to 200 L/min), T-10A, T-3A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Non-Adjustable Direct-Acting Relief Valve
  • Capacity: 25 gpm to 50 gpm (95 L/min to 200 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-10A, T-3A
Valve function
Non-Adjustable Direct-Acting Relief Valve
Series (frame sizes)
1 to 2
Cavity
T-10A, T-3A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting relief cartridge with its setting fixed at the factory. When pressure at port 1 reaches the setting it opens to tank at port 2 and throttles flow to cap the pressure. It is fast, quiet, dirt-tolerant and practically leak-free, and with no adjustment it cannot be tampered with.

Sizes and cavities

Sun Hydraulics builds this valve in 2 sizes. The series sets the cavity it screws into and its flow capacity:

  • RDDA3 — series 1, T-10A cavity, 25 gpm (95 L/min)
  • RDFA3 — series 2, T-3A cavity, 50 gpm (200 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min. (0,7 cc/min)
  • Typical response time: 2 ms
  • Reseat: >90% of setting

Configuration options

The letters after the base model code choose these options (shown for RDDA3; a size may add or drop a choice):

  • Setting range: A — 500 - 3000 psi (35 - 210 bar), C — 1000 - 6000 psi (70 - 420 bar), D — 200 - 800 psi (14 - 55 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Selection notes

  • You specify the setting when ordering; the valve is factory set and tamper-proof.
  • Shares the cavity of Sun's adjustable 2-port reliefs of the same frame size.

Where it is used

OEM circuits where the relief pressure must not be changed in service.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 1: Buna: 990310007, Viton: 990310006; series 2: Buna: 990303007, EPDM: 990303014, Polyurethane: 990303002, Viton: 990303006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RDDA3AN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Performance

ParameterValue
Capacity25 gpm to 50 gpm (95 L/min to 200 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 500 - 3000 psi (35 - 210 bar), C — 1000 - 6000 psi (70 - 420 bar), D — 200 - 800 psi (14 - 55 bar)
Max leakage10 drops/min. (0,7 cc/min)

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 1: Buna: 990310007, Viton: 990310006; series 2: Buna: 990303007, EPDM: 990303014, Polyurethane: 990303002, Viton: 990303006
Weight.30 lb (0,15 kg) to .50 lb (0,25 kg)

Identification

ParameterValue
Valve functionNon-Adjustable Direct-Acting Relief Valve
Series (frame sizes)1 to 2
CavityT-10A, T-3A

Configuration

ParameterValue
Seal materialN — Buna-N, V — Viton
Material / coating/LH — Mild Steel, Zinc-Nickel

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at