Sun Hydraulics Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity — RPEC8, RPGC8, RPIC8, RPKC8, Series 1 to 4

Sun Hydraulics relief main stage with integral T-8A pilot cavity: RPEC8, RPGC8, RPIC8, RPKC8, series 1 to 4, 25 gpm to 200 gpm (95 L/min to 760 L/min), T-10A, T-3A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Relief Main Stage with Integral T-8A Pilot Cavity
- Capacity: 25 gpm to 200 gpm (95 L/min to 760 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-10A, T-3A, T-16A, T-18A
- Valve function
- Relief Main Stage with Integral T-8A Pilot Cavity
- Series (frame sizes)
- 1 to 4
- Cavity
- T-10A, T-3A, T-16A, T-18A
Product description
A pilot-operated relief main stage with its own T-8A control cavity machined into the cartridge. Any T-8A pressure-control cartridge screwed into that cavity sets the relief pressure — a manual pilot relief, an electro-proportional pilot, or an air-controlled one — so the same main stage can be adjusted locally or controlled remotely.
Sizes and cavities
Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:
- RPEC8 — series 1, T-10A cavity, 25 gpm (95 L/min)
- RPGC8 — series 2, T-3A cavity, 50 gpm (200 L/min)
- RPIC8 — series 3, T-16A cavity, 100 gpm (380 L/min)
- RPKC8 — series 4, T-18A cavity, 200 gpm (760 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for RPEC8; a size may add or drop a choice):
- Setting range: D — 25 - 3000 psi (1,7 - 210 bar), W — 100 - 5000 psi (7 - 350 bar)
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
Selection notes
- Supplied as the main stage; the T-8A pilot cartridge is chosen separately.
- The pilot cartridge's setting determines the pressure difference across the valve.
Where it is used
Building remotely or electronically controlled relief functions without a separate pilot body.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, EPDM: 990018014, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RPEC8WN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Relief Main Stage with Integral T-8A Pilot Cavity |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-10A, T-3A, T-16A, T-18A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, EPDM: 990203014, Polyurethane: 990003002, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, EPDM: 990018014, Polyurethane: 990018002, Viton: 990018006 |
| Weight | .30 lb (0,15 kg) to 2.50 lb (1,15 kg) |
Performance
| Parameter | Value |
|---|---|
| Capacity | 25 gpm to 200 gpm (95 L/min to 760 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | D — 25 - 3000 psi (1,7 - 210 bar), W — 100 - 5000 psi (7 - 350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.RPEC8
- Series
- 1
- Cavity
- T-10A
- Capacity
- 25 gpm / 95 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPGC8
- Series
- 2
- Cavity
- T-3A
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPIC8
- Series
- 3
- Cavity
- T-16A
- Capacity
- 100 gpm / 380 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.RPKC8
- Series
- 4
- Cavity
- T-18A
- Capacity
- 200 gpm / 760 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity (RPEC8, RPGC8, RPIC8 and others) and what does it do?▾
What does the Sun model code for the RPEC8 valve mean?▾
What sizes and flow capacities does the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity come in?▾
What pressure and setting range does the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity have?▾
Which seal and material options does the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity come with?▾
How is the setting of the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity chosen?▾
Which seal kit fits the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity (RPEC8, RPGC8, RPIC8 and others)?▾
Which cavity and installation torque does the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity need?▾
Where is the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity used?▾
How does the Sun RPEC8 valve differ from the Sun Pilot-Operated, Balanced Piston Sequence Main Stage with Integral T-8A Control Cavity?▾
What do I fit in the T-8A cavity on the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity?▾
Can I buy the Sun Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








