Skive Crimp Ferrule for R12 Four-Spiral Hose
Skive Crimp Ferrule for R12 Four-Spiral Hose — 10 sizes, -04 to -32.
Key features
- Fitting Configuration: straight
- Nominal Size Range: -04 to -32
- Fitting Configuration
- straight
- Nominal Size Range
- -04 to -32
Product description
The Skive Crimp Ferrule for R12 Four-Spiral Hose is part of the Indus hydraulic connection range.
A distinct ferrule from the R12 pair already in this category, and the dimensions say so — at DN10 this one crimps to 27.5 mm where the other reaches 25.5 mm. It runs the full DN6 to DN51 range in one part series. Check which R12 construction your hose is before ordering.
Construction
- Configuration: straight
- Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)
Sizes
10 sizes, -04 to -32. The full size and dimension table is on this page.
How to order
Quote the Indus part number for the size you need. Tell us the hose grade and bore and we will include the matching crimp ferrule — the ferrule follows the hose, not the fitting. Indus crimps and pressure-tests assemblies before dispatch.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -32 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (316 stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE 100R12, four-spiral construction |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Hose bore | D (mm) | L (mm) |
|---|---|---|---|
| IH-CF-SK-R12-4SP-04 | -04 · 1/4" · DN6 | 22 | 37.5 |
| IH-CF-SK-R12-4SP-06 | -06 · 3/8" · DN10 | 27.5 | 39 |
| IH-CF-SK-R12-4SP-08 | -08 · 1/2" · DN12 | 31.5 | 41 |
| IH-CF-SK-R12-4SP-10 | -10 · 5/8" · DN16 | 34 | 43 |
| IH-CF-SK-R12-4SP-12 | -12 · 3/4" · DN20 | 39 | 51 |
| IH-CF-SK-R12-4SP-14 | -14 · 7/8" · DN22 | 43.5 | 54 |
| IH-CF-SK-R12-4SP-16 | -16 · 1" · DN25 | 46.5 | 61.5 |
| IH-CF-SK-R12-4SP-20 | -20 · 1.1/4" · DN32 | 55.5 | 67.5 |
| IH-CF-SK-R12-4SP-24 | -24 · 1.1/2" · DN38 | 63.5 | 75 |
| IH-CF-SK-R12-4SP-32 | -32 · 2" · DN51 | 78 | 79 |
D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What sizes are available?▾
What is the maximum working pressure?▾
Which ferrule pairs with this fitting?▾
Is stainless steel available?▾
Can Indus crimp the assembly?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Failure analysis
Crimp too tight, crimp too loose: what each one leaves behind
A crimp is a measured diameter with a tolerance in tenths of a millimetre. Miss it in either direction and the assembly fails — but it fails differently, and the difference is visible on the failed part.
4 min read
Assembly, crimping & certification
Skiving explained: when a fitting needs it, and what happens if you skip it
Skive and no-skive fittings are not interchangeable, and the difference is invisible once the assembly is crimped. What each does, and why the mistake only shows up under pressure.
3 min read
Failure analysis
It burst at the fitting, not mid-length: what that tells you
Where a hose failed is diagnostic. A burst within a hand’s width of the ferrule almost never means the hose was under-rated — it means something at that end was wrong, and replacing like for like will do it again.
5 min read
Engineers viewing this also looked at
Skive Crimp Ferrule for R1A / 1ST Hose
Skive Crimp Ferrule for R2A / 2ST Hose
Skive Crimp Ferrule for R9 Hose
Specialty Crimp Ferrule for PTFE / Teflon Hose
Double-Skive Crimp Ferrule for R13 Hose
No-Skive Crimp Ferrule for 1SN / 2SN Hose
No-Skive Crimp Ferrule for Automotive A/C Hose (SAE J2064)
