Parker Hydraulic Hose, 50 Feet

Parker Hydraulic Hose, 50 Feet, 3/8" to 3/4": 3 part numbers.
Product description
Parker Hydraulic Hose, 50 Feet, 3/8" to 3/4": 3 part numbers.
Specification
- Type: Hydraulic Hose
- Material: Rubber
- Size range: 3/8" to 3/4"
- Pressure stated by the maker: 3,100 to 5,000 psi (214 to 345 bar), by size
- Temperature: -40°F to +212°F
- Cover Material: Synthetic Rubber
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application | Hydraulic |
| Color | Black |
| Cover Material | Synthetic Rubber |
| Distinct Properties | Constant Pressure 3600 psi |
| Hose Color | Black |
| Hose Configuration | Bulk Hose |
| Hose Cover Material | Synthetic Rubber |
| Hose Tube Material | Synthetic Rubber |
| Material | Rubber |
| Series | 302 Series |
| System Of Measurement | Imperial |
| Temp. | -40°F to +212°F |
| Tube Material | Synthetic Rubber |
Shipping & lead time
Sizes & part numbers
3 sizes- Parker Hannifin part no.302-12-BX
- Description
- Hydraulic Hose 3/4 Inch 50 Feet
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 241.3
- Working pressure (bar)
- 214
- Parker Hannifin part no.302-6-BX
- Description
- Hydraulic Hose 3/8 Inch 50 Feet
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 127
- Working pressure (bar)
- 328
- Parker Hannifin part no.471ST-6-RL
- Description
- Hydraulic Hose 3/8 Inch
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 63.5
- Working pressure (bar)
- 345
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Parker Hydraulic Hose, 50 Feet used for?▾
Which sizes does the Parker Hydraulic Hose, 50 Feet come in?▾
What does part number 302-6-BX of the Parker Hydraulic Hose, 50 Feet cover?▾
What is the working pressure of the Parker Hydraulic Hose, 50 Feet?▾
What temperatures and fluids suit the Parker Hydraulic Hose, 50 Feet?▾
Which standard does the Parker Hydraulic Hose, 50 Feet meet?▾
Which fittings and ferrules do I use on the Parker Hydraulic Hose, 50 Feet?▾
How should I route the Parker Hydraulic Hose, 50 Feet and what is the minimum bend radius?▾
How do I match the size of the Parker Hydraulic Hose, 50 Feet to my old hose?▾
Parker Hydraulic Hose, 50 Feet or Parker GlobalCore 487 Series Hydraulic Hoses, Tough Cover: which should I choose?▾
Where is the Parker Hydraulic Hose, 50 Feet made and what is its HS code?▾
Do you stock the Parker Hydraulic Hose, 50 Feet in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








