MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit — 2-1/2"

MannTek DAC tank unit: the fixed half of a dry aviation fuel coupling to ISO 45, MS24484 and STANAG 3105, for storage tanks, refuellers and mobile tanks. 2-1/2", aluminium or stainless, no yellow parts in contact with fuel. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Aviation Coupling
- Coupling Type / Variant: Tank unit (fixed half, no swivel)
- End A Configuration: 2-1/2" bayonet interface to ISO 45 / STANAG 3105, with valve
- End B Configuration: Female BSP or NPT thread, or flange (EN, ANSI, TW, TTMA)
- Size Range: 2-1/2" (DN 65, socket Ø 105 mm)
- Working Pressure: 10 bar (MannTek)
- Coupling Family
- Dry Aviation Coupling
- Coupling Type / Variant
- Tank unit (fixed half, no swivel)
- End A Configuration
- 2-1/2" bayonet interface to ISO 45 / STANAG 3105, with valve
- End B Configuration
- Female BSP or NPT thread, or flange (EN, ANSI, TW, TTMA)
- Size Range
- 2-1/2" (DN 65, socket Ø 105 mm)
- Working Pressure
- 10 bar (MannTek)
Product description
The tank unit is the fixed half of a MannTek Dry Aviation Coupling (DAC). It has no swivel and is mounted as the filling connector on storage tanks, aviation refuellers and mobile tank containers. A DAC hose unit couples to it with a turning motion that opens the valves in both halves; turning back closes both before the halves separate, so aviation fuel is transferred with minimal product loss and no contamination from an open connection.
The DAC is built to ISO 45, MS24484 and STANAG 3105 with a 2-1/2" bayonet connection, and can be used at almost any transfer point in the fuel logistics chain: loading and unloading tank trucks and refuellers, de-fuelling and defence applications.
Specification
- Size: 2-1/2" (DN 65, socket Ø 105 mm), the only size in the DAC range
- Body: aluminium as standard, or stainless steel 1.4408 (AISI 316); no yellow parts in contact with the fuel
- Seals: FKM or NBR, with low-temperature seals available
- Working pressure: 10 bar; flow capacity up to 2,100 L/min (MannTek)
- Threaded (BSP, NPT) or flanged (EN, ANSI, TW, TTMA) connections
Not for into-plane refuelling, and not approved for underwing refuelling.
Documents
MannTek's operating manual and the 2-1/2" tank unit service instruction for the DAC tank unit are attached in the Documents tab, as MannTek publishes them, for installation, operation and servicing. Download them before the coupling arrives so the site team has the procedure to hand.
Options and accessories
MannTek builds the DAC tank unit with these options:
- Colour coding: body, flange and handles in any colour, so each coupling is clearly matched to its medium.
- Drain connection on the tank or hose unit, for draining, venting and sampling.
- Pressure equalizing valve: where liquid is trapped behind the tank unit, it relieves the pressure once the hose unit is connected and before the valves open, so the coupling can still be made.
- Pressure bleeding valve: opens at a preset limit where trapped liquid could build up pressure as the line warms.
- Adapters between DDC (STANAG 3756) and DAC (STANAG 3105) couplings, often used in military fuel handling.
- Tank unit with eccentric flange (1" to 6"), so no liquid is left in the pipework.
- Dust caps and dust plugs to keep dirt and water off the coupling faces.
- Non-projecting pistons: the piston spindle does not protrude when coupled, for a tank unit mounted directly on a ball valve.
Options for the hose unit are listed on its own page. Name the options you need when you ask for a quotation and we confirm the MannTek build.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and list any options. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Aviation Coupling |
| Coupling Type / Variant | Tank unit (fixed half, no swivel) |
| Notes | Not for into-plane or underwing refuelling. MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | 2-1/2" bayonet interface to ISO 45 / STANAG 3105, with valve |
| End B Configuration | Female BSP or NPT thread, or flange (EN, ANSI, TW, TTMA) |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2-1/2" (DN 65, socket Ø 105 mm) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminium (standard) or stainless steel 1.4408 (AISI 316) |
| Seal / Gasket | FKM or NBR; low-temperature seals available |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 10 bar (MannTek) |
| Flow capacity | Up to 2,100 L/min, as published by MannTek |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 45, MS24484, STANAG 3105 |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-MNT-DAC-TU-065-AL
- Description
- Body: aluminium (standard)
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-TU-065-SS
- Description
- Body: stainless steel 1.4408 (AISI 316)
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Working pressure (bar)
- 10
Description — What this part number is, as the manufacturer lists it. Body size — Nominal body size of the coupling, which sets which halves mate. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit and what is it used for?▾
What part numbers does the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit come in, for example IH-MNT-DAC-TU-065-AL?▾
What sizes does the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit come in?▾
What working pressure is the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit rated for?▾
What is the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit made from?▾
What standards does the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit conform to?▾
What does the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit connect to?▾
How does the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit compare with a camlock for fluid transfer?▾
Where is the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit used?▾
Is the tank unit available in stainless steel on the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit?▾
How does the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit differ from the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit —?▾
Can I buy the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Industrial hose
Dry disconnect vs camlock couplings: when the spill on disconnect matters
A camlock is an open coupling: part it under a full hose and the contents come out. A dry disconnect has a valve in each half that closes before the halves separate. How the two compare, which duties justify a dry disconnect, and what changing over involves.
5 min read
Industrial hose
LPG transfer couplings: dry gas couplings, EN 13175 and replacing open ACME
Open ACME couplings vent LPG every time a bobtail or tanker hose is disconnected. A dry gas coupling closes both halves before they part. What a dry gas coupling is, the standards it is built to, sizes by duty, and how to fit one to existing ACME connections.
3 min read
Industrial hose
Tanker loading and vapour recovery hose: reeling hose, composite and dry disconnects
A fuel tanker uses three different hoses and a coupling that must not drip. What a reeling hose is built for, why vapour recovery is composite, and when a dry disconnect earns its price.
4 min read








