MannTek DDC Dry Disconnect Coupling, Tank Unit — 1" to 8"

MannTek DDC tank unit: the fixed half of a dry disconnect coupling for tankers, ISO and IBC containers, storage tanks and ship manifolds. 1" to 8", STANAG 3756 / ASTM F1122 interface, valve closes on disconnect with minimal product loss. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Disconnect Coupling
- Coupling Type / Variant: Tank unit (fixed half, no swivel)
- End A Configuration: DDC bayonet interface to STANAG 3756 / ASTM F1122, with valve
- End B Configuration: Female BSP or NPT thread, or flange (ANSI, EN, TW, TTMA, JIS)
- Size Range: 1" to 8" (socket Ø 56 to 272 mm)
- Working Pressure: 10 to 25 bar by body material, five times safety factor (MannTek)
- Coupling Family
- Dry Disconnect Coupling
- Coupling Type / Variant
- Tank unit (fixed half, no swivel)
- End A Configuration
- DDC bayonet interface to STANAG 3756 / ASTM F1122, with valve
- End B Configuration
- Female BSP or NPT thread, or flange (ANSI, EN, TW, TTMA, JIS)
- Size Range
- 1" to 8" (socket Ø 56 to 272 mm)
- Working Pressure
- 10 to 25 bar by body material, five times safety factor (MannTek)
Product description
The tank unit is the fixed half of a MannTek Dry Disconnect Coupling (DDC). It has no swivel and is mounted permanently as the filling or discharge connector on storage tanks, IBC and ISO containers, road tankers, rail tank containers and ship manifolds. A DDC hose unit couples to it with a turning motion that opens the valves in both halves; turning back closes both valves before the halves separate, so the line disconnects with minimal product loss.
MannTek has built the DDC since 1995. The connection interface follows STANAG 3756 and ASTM F1122, the bayonet principle used across the fuel, chemical and petrochemical industries, so tank units and hose units of the same size are interchangeable.
Sizes and connections
Seven sizes from 1" (socket Ø 56 mm) to 8" (Ø 272 mm). The tank-side connection is a BSP or NPT thread, or a flange to ANSI, EN, TW, TTMA or JIS, with other flanges on request. MannTek publishes flow capacity from 380 L/min at 1" to 20,000 L/min at 8". The Sizes & Part Numbers tab lists socket, threads, flanges and body materials for each size.
Materials and seals
- Body: aluminium, brass or gun metal, stainless steel, titanium, Hastelloy, PVDF or PEEK, depending on size
- Seals: FKM, NBR, EPDM or FFKM
- Working pressure: 10 to 25 bar depending on body material, with a five times safety factor (MannTek)
Where it is used
Road and rail tanker loading and unloading, including bottom loading; ISO and IBC containers; industrial process plant; pharmaceutical and petrochemical transfer; and, in the 4" to 8" sizes, ship-to-shore, ship-to-ship and marine bunkering connections.
Options and accessories
MannTek builds the DDC tank unit with these options:
- Colour coding: body, flange and handles in any colour, so each coupling is clearly matched to its medium.
- Stop before disconnect: if a valve in either half fails to seal, because of damage or a foreign body, a patented blocking function stops the halves being separated, so the operator is not exposed to the medium.
- Selectivity (coding) system: slots on the tank unit and pins on the hose unit stop the wrong medium being connected; the number of positions depends on the size.
- Drain connection on the tank or hose unit, for draining, venting and sampling.
- Pressure equalizing valve: where liquid is trapped behind the tank unit, it relieves the pressure once the hose unit is connected and before the valves open, so the coupling can still be made.
- Pressure bleeding valve: opens at a preset limit where trapped liquid could build up pressure as the line warms.
- Angular tank unit, in brass.
- Adapters between DDC (STANAG 3756) and DAC (STANAG 3105) couplings, often used in military fuel handling.
- Tank unit with eccentric flange (1" to 6"), so no liquid is left in the pipework.
- Safety pressure cap: holds pressure, warns of excess pressure and lets the operator release it safely; MannTek states it is approved to ADR/RID as a third closure.
- Open/close indicator: shows which way to turn the coupling and whether the valves are open or closed.
- Dust plug with purge capability.
- Dust caps and dust plugs to keep dirt and water off the coupling faces.
- Non-projecting pistons: the piston spindle does not protrude when coupled, for a tank unit mounted directly on a ball valve.
- Compact tank unit where space is tight, for example inside a tank-truck cabinet.
Options for the hose unit are listed on its own page. Name the options you need when you ask for a quotation and we confirm the MannTek build.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and list any options. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Disconnect Coupling |
| Coupling Type / Variant | Tank unit (fixed half, no swivel) |
| Notes | Body, connection, seals and options are chosen per order; MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | DDC bayonet interface to STANAG 3756 / ASTM F1122, with valve |
| End B Configuration | Female BSP or NPT thread, or flange (ANSI, EN, TW, TTMA, JIS) |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1" to 8" (socket Ø 56 to 272 mm) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminium, brass, gun metal, stainless steel, titanium, Hastelloy, PVDF, PEEK (by size) |
| Seal / Gasket | FKM, NBR, EPDM or FFKM |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 10 to 25 bar by body material, five times safety factor (MannTek) |
| Flow capacity | 380 L/min (1") to 20,000 L/min (8"), as published by MannTek |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | Connection interface to STANAG 3756 and ASTM F1122 |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-MNT-DDC-TU-025
- Description
- Body: stainless steel, aluminium, brass, titanium, PEEK
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Max flow (L/min)
- 380
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 3/4", 1", 1-1/4" BSP and NPT
- Indus part no.IH-MNT-DDC-TU-050
- Description
- Body: stainless steel, aluminium, brass, titanium, Hastelloy / PVDF, PEEK
- Body size
- Ø 70 mm
- Nominal size
- 2" (DN 50)
- Max flow (L/min)
- 1,400
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 1-1/2", 2" BSP and NPT
- Indus part no.IH-MNT-DDC-TU-065
- Description
- Body: stainless steel, aluminium, gun metal, titanium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,300
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 2-1/2", 3" BSP and NPT
- Indus part no.IH-MNT-DDC-TU-080
- Description
- Body: stainless steel, aluminium, gun metal, titanium, Hastelloy / PVDF, PEEK
- Body size
- Ø 119 mm
- Nominal size
- 3" (DN 80)
- Max flow (L/min)
- 3,200
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 3" BSP and NPT
- Indus part no.IH-MNT-DDC-TU-100
- Description
- Body: stainless steel, aluminium, gun metal, titanium
- Body size
- Ø 164 mm
- Nominal size
- 4" (DN 100)
- Max flow (L/min)
- 5,400
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 4" BSP and NPT
- Indus part no.IH-MNT-DDC-TU-150
- Description
- —
- Body size
- Ø 238 mm
- Nominal size
- 6" (DN 150)
- Max flow (L/min)
- 12,000
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 6" BSP and NPT
- Indus part no.IH-MNT-DDC-TU-200
- Description
- —
- Body size
- Ø 272 mm
- Nominal size
- 8" (DN 200)
- Max flow (L/min)
- 20,000
- Mount
- ANSI, EN, TW, TTMA, JIS
- Ports
- 8" NPT
Description — What this part number is, as the manufacturer lists it. Body size — Nominal body size of the coupling, which sets which halves mate. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
What is the MannTek DDC Dry Disconnect Coupling, Tank Unit and what is it used for?▾
What part numbers does the MannTek DDC Dry Disconnect Coupling, Tank Unit come in, for example IH-MNT-DDC-TU-025?▾
What sizes does the MannTek DDC Dry Disconnect Coupling, Tank Unit come in?▾
Which body sizes does the MannTek DDC Dry Disconnect Coupling, Tank Unit list?▾
What working pressure is the MannTek DDC Dry Disconnect Coupling, Tank Unit rated for?▾
What is the MannTek DDC Dry Disconnect Coupling, Tank Unit made from?▾
What standards does the MannTek DDC Dry Disconnect Coupling, Tank Unit conform to?▾
What does the MannTek DDC Dry Disconnect Coupling, Tank Unit connect to?▾
How does the MannTek DDC Dry Disconnect Coupling, Tank Unit compare with a camlock for fluid transfer?▾
Where is the MannTek DDC Dry Disconnect Coupling, Tank Unit used?▾
What is the difference between a tank unit and a hose unit on the MannTek DDC Dry Disconnect Coupling, Tank Unit?▾
Do you stock the MannTek DDC Dry Disconnect Coupling, Tank Unit in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








