MannTek DDC Dust Caps, Dust Plugs and Pressure Caps — 1" to 8"

Closures for MannTek DDC dry disconnect couplings, 1" to 8": dust caps and dust plugs in PE, aluminium or stainless steel, sealing caps to 10 bar, and pressure caps with relief valve as third closure to ADR/RID. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Disconnect Coupling
- Coupling Type / Variant: Closures: dust cap, dust plug, sealing cap, pressure cap
- End A Configuration: DDC interface to STANAG 3756
- Size Range: 1" to 8" (socket Ø 56 to 272 mm)
- Working Pressure: Sealing cap 10 bar; pressure cap PN 25 (stainless) or PN 10 (aluminium)
- Coupling Family
- Dry Disconnect Coupling
- Coupling Type / Variant
- Closures: dust cap, dust plug, sealing cap, pressure cap
- End A Configuration
- DDC interface to STANAG 3756
- Size Range
- 1" to 8" (socket Ø 56 to 272 mm)
- Working Pressure
- Sealing cap 10 bar; pressure cap PN 25 (stainless) or PN 10 (aluminium)
Product description
A dry disconnect coupling left open collects dirt, water and grit on its sealing faces, and that is what wears valves and seals. MannTek makes closures for every DDC size so each half can be capped when it is not in use, and, on road and rail tankers, so the tank unit can carry the pressure-rated third closure the dangerous-goods rules ask for.
The four types
- Dust caps in PE (polyethylene composite), aluminium or stainless steel. A spring-loaded locking pin has to be pulled before the cap comes off, so it cannot be released by accident. Simple rubber, AdBlue and plastic caps are listed for some sizes.
- Dust plugs in PE, aluminium or stainless steel, supplied with cable attachment and eyelets. MannTek recommends them to extend the life of the coupler.
- Sealing caps in aluminium or stainless steel, pressure-tight to 10 bar, for duties that need a tight closure but no pressure relief.
- Pressure caps with a pressure relief valve: stainless steel PN 25, aluminium PN 10 for road tankers, and an aluminium pressure cap at 4". MannTek describes them as a third closure to ADR/RID 6.8.2.2.2.
Which closures each size takes
The range differs by size: the 2" coupling has the widest choice, and 6" and 8" have dust caps and plugs only. The Sizes & Part Numbers tab lists every closure MannTek offers for each size, with its type and material.
Related options
MannTek also offers a vented dust and de-icing cap, a dust plug with purge capability and a safety pressure cap with warning indicators for excessive pressure. Ask if your installation needs one of these.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the coupling half it closes, and the type and material from the size table. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Disconnect Coupling |
| Coupling Type / Variant | Closures: dust cap, dust plug, sealing cap, pressure cap |
| Notes | Range differs by size; see the size table. MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | DDC interface to STANAG 3756 |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1" to 8" (socket Ø 56 to 272 mm) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | PE (polyethylene composite), aluminium, stainless steel; rubber and plastic for some sizes |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | Sealing cap 10 bar; pressure cap PN 25 (stainless) or PN 10 (aluminium) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | Pressure caps: third closure to ADR/RID 6.8.2.2.2 (MannTek) |
Shipping & lead time
Sizes & part numbers
60 sizes- Indus part no.IH-MNT-DDC-CAP-PE-025
- Description
- PE (polyethylene composite), with spring-loaded locking pin
- Type
- Dust cap
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-CAP-AL-025
- Description
- Aluminium, with spring-loaded locking pin
- Type
- Dust cap
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-CAP-SS-025
- Description
- Stainless steel, with spring-loaded locking pin
- Type
- Dust cap
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-SEAL-SS-025
- Description
- Stainless steel, pressure-tight to 10 bar, no pressure relief
- Type
- Sealing cap
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-PRV-SS-025
- Description
- Stainless steel, PN 25, with pressure relief valve; third closure to ADR/RID 6.8.2.2.2
- Type
- Pressure cap
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-PLUG-PE-025
- Description
- PE (polyethylene composite), with cable and eyelets
- Type
- Dust plug
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-PLUG-AL-025
- Description
- Aluminium, with cable and eyelets
- Type
- Dust plug
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Indus part no.IH-MNT-DDC-PLUG-SS-025
- Description
- Stainless steel, with cable and eyelets
- Type
- Dust plug
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
Show all 60 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Type — Which part of the coupling this is: coupler (female half), nipple (male half), complete set, dust cap or adapter. Body size — Nominal body size of the coupling, which sets which halves mate. Ask us for the dimension drawing if you need it stamped.
What is the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps and what is it used for?▾
What part numbers does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps come in, for example IH-MNT-DDC-CAP-PE-025?▾
What sizes does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps come in?▾
Which body sizes does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps list?▾
What working pressure is the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps rated for?▾
What is the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps made from?▾
What standards does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps conform to?▾
What does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps connect to?▾
How does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps compare with a camlock for fluid transfer?▾
Where is the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps used?▾
How does the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps differ from the MannTek DAC Dust Caps and Dust Plugs (ISO 45) — 2-1/2"?▾
Do you stock the MannTek DDC Dust Caps, Dust Plugs and Pressure Caps in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








