MannTek DGC Dry Gas Coupling for LPG, Tank Unit — 1" to 8"

MannTek DGC tank unit: dry break coupling for LPG and other gases, the fixed half for tanks, bobtails, tankers and manifolds. 1" to 8", stainless steel, 25 bar, EN 13175. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Gas Coupling (LPG)
- Coupling Type / Variant: Tank unit (fixed half, no swivel)
- End A Configuration: DGC dry break interface with valve
- End B Configuration: Female BSP, NPT or ACME thread (Whitworth available), or ANSI / EN flange
- Size Range: 1" to 8" (socket Ø 56 to 272 mm)
- Working Pressure: 25 bar (MannTek)
- Coupling Family
- Dry Gas Coupling (LPG)
- Coupling Type / Variant
- Tank unit (fixed half, no swivel)
- End A Configuration
- DGC dry break interface with valve
- End B Configuration
- Female BSP, NPT or ACME thread (Whitworth available), or ANSI / EN flange
- Size Range
- 1" to 8" (socket Ø 56 to 272 mm)
- Working Pressure
- 25 bar (MannTek)
Product description
The tank unit is the fixed half of a MannTek Dry Gas Coupling (DGC). It has no swivel and is mounted as the filling or discharge connector on LPG storage tanks, bobtails, tank trucks, rail tank cars and ship manifolds. A DGC hose unit couples to it with a turning motion that opens the valves in both halves; turning back closes both before they separate, so the transfer ends with minimal product loss.
MannTek designed the DGC for liquefied petroleum gas (propane and butane); it is now used for many other gases. It is designed and manufactured to international standards such as EN 13175, and the 1" size serves as a heavy-duty vehicle adapter to EN 13760.
Sizes and connections
Six sizes from 1" (socket Ø 56 mm) to 8" (Ø 272 mm). Threaded connections are BSP, NPT or ACME, with Whitworth available, and flanges are to ANSI or EN. MannTek publishes flow capacity from 460 L/min at 1" to 24,200 L/min at 8". The Sizes & Part Numbers tab lists each size and its typical duty.
Construction
- Body: stainless steel
- Seals: MannTek low-temperature FKM, for all LPG qualities and operating temperatures
- Working pressure: 25 bar (MannTek)
- Rubber protecting ring, weather-resistant and electrically non-conductive; inner cam curve protected from impact
Options and accessories
MannTek builds the DGC tank unit with these options:
- Colour coding: body, flange and handles in any colour, so each coupling is clearly matched to its medium.
- Stop before disconnect: if a valve in either half fails to seal, because of damage or a foreign body, a patented blocking function stops the halves being separated, so the operator is not exposed to the medium.
- Selectivity (coding) system: slots on the tank unit and pins on the hose unit stop the wrong medium being connected; the number of positions depends on the size.
- Drain connection on the tank or hose unit, for draining, venting and sampling.
- Pressure equalizing valve: where liquid is trapped behind the tank unit, it relieves the pressure once the hose unit is connected and before the valves open, so the coupling can still be made.
- Pressure bleeding valve: opens at a preset limit where trapped liquid could build up pressure as the line warms.
- Tank unit with eccentric flange (1" to 6"), so no liquid is left in the pipework.
- Safety pressure cap: holds pressure, warns of excess pressure and lets the operator release it safely; MannTek states it is approved to ADR/RID as a third closure.
- Open/close indicator: shows which way to turn the coupling and whether the valves are open or closed.
- Dust plug with purge capability.
- ACME and Whitworth threads for fitting directly to existing LPG connections in place of open ACME couplings, also with a drain connection to release trapped liquid.
- Dust caps and dust plugs to keep dirt and water off the coupling faces.
- Non-projecting pistons: the piston spindle does not protrude when coupled, for a tank unit mounted directly on a ball valve.
Options for the hose unit are listed on its own page. Name the options you need when you ask for a quotation and we confirm the MannTek build.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and list any options. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Gas Coupling (LPG) |
| Coupling Type / Variant | Tank unit (fixed half, no swivel) |
| Notes | MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | DGC dry break interface with valve |
| End B Configuration | Female BSP, NPT or ACME thread (Whitworth available), or ANSI / EN flange |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1" to 8" (socket Ø 56 to 272 mm) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Stainless steel |
| Seal / Gasket | Low-temperature FKM |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 25 bar (MannTek) |
| Flow capacity | 460 L/min (1") to 24,200 L/min (8"), as published by MannTek |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | EN 13175; 1" as heavy-duty vehicle adapter to EN 13760 |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-MNT-DGC-TU-025
- Description
- E.g. heavy-duty vehicle adapter to EN 13760
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Max flow (L/min)
- 460
- Mount
- ANSI, EN
- Ports
- 3/4", 1", 1-1/4" BSP, NPT, ACME
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DGC-TU-050
- Description
- E.g. bobtail and tank truck loading to EN 13175
- Body size
- Ø 71 mm
- Nominal size
- 2" (DN 50)
- Max flow (L/min)
- 1,680
- Mount
- ANSI, EN
- Ports
- 1-1/2", 2" BSP, NPT, ACME
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DGC-TU-080
- Description
- E.g. tank truck and rail car loading
- Body size
- Ø 119 mm
- Nominal size
- 3" (DN 80)
- Max flow (L/min)
- 3,850
- Mount
- ANSI, EN
- Ports
- 3" BSP, NPT, ACME
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DGC-TU-100
- Description
- E.g. ship-to-shore loading
- Body size
- Ø 164 mm
- Nominal size
- 4" (DN 100)
- Max flow (L/min)
- 6,500
- Mount
- ANSI, EN
- Ports
- 4" BSP, NPT, ACME
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DGC-TU-150
- Description
- E.g. ship-to-shore loading
- Body size
- Ø 238 mm
- Nominal size
- 6" (DN 150)
- Max flow (L/min)
- 14,400
- Mount
- ANSI, EN
- Ports
- 6" BSP, NPT, ACME
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DGC-TU-200
- Description
- E.g. ship-to-shore loading
- Body size
- Ø 272 mm
- Nominal size
- 8" (DN 200)
- Max flow (L/min)
- 24,200
- Mount
- ANSI, EN
- Ports
- 8" NPT, ACME
- Working pressure (bar)
- 25
Description — What this part number is, as the manufacturer lists it. Body size — Nominal body size of the coupling, which sets which halves mate. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek DGC Dry Gas Coupling for LPG, Tank Unit and what is it used for?▾
What part numbers does the MannTek DGC Dry Gas Coupling for LPG, Tank Unit come in, for example IH-MNT-DGC-TU-025?▾
What sizes does the MannTek DGC Dry Gas Coupling for LPG, Tank Unit come in?▾
Which body sizes does the MannTek DGC Dry Gas Coupling for LPG, Tank Unit list?▾
What working pressure is the MannTek DGC Dry Gas Coupling for LPG, Tank Unit rated for?▾
What is the MannTek DGC Dry Gas Coupling for LPG, Tank Unit made from?▾
What standards does the MannTek DGC Dry Gas Coupling for LPG, Tank Unit conform to?▾
What does the MannTek DGC Dry Gas Coupling for LPG, Tank Unit connect to?▾
How does the MannTek DGC Dry Gas Coupling for LPG, Tank Unit compare with a camlock for fluid transfer?▾
Where is the MannTek DGC Dry Gas Coupling for LPG, Tank Unit used?▾
What pressure is the DGC rated for on the MannTek DGC Dry Gas Coupling for LPG, Tank Unit?▾
Is the MannTek DGC Dry Gas Coupling for LPG, Tank Unit in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








