Skip to content
MANNTEKIH-MNT-DDC-HU

MannTek DDC Dry Disconnect Coupling, Hose Unit — 1" to 8"

Dry Disconnect CouplingsEx-stock · delivery in 3 days
MannTek 2" DDC Design 2.0 hose unit with blue twin handles, female thread and black bumper
VIEW 01·MannTek 2" DDC Design 2.0 hose unit with blue twin handles, female thread and black bumper
1 / 5

MannTek DDC hose unit: the moving half of a dry disconnect coupling, with integrated swivel and handles, for hose assemblies and loading arms. 1" to 8", STANAG 3756 / ASTM F1122 interface, 2" and 3" in Design 2.0. From Indus Hydraulics, authorised MannTek distributor, UAE.

Key features

  • Coupling Family: Dry Disconnect Coupling
  • Coupling Type / Variant: Hose unit (moving half, with swivel)
  • End A Configuration: DDC bayonet interface to STANAG 3756 / ASTM F1122, with valve
  • End B Configuration: Female BSP or NPT thread, or flange (ANSI, EN, TW, TTMA, JIS)
  • Size Range: 1" to 8" (socket Ø 56 to 272 mm)
  • Working Pressure: 10 to 25 bar by body material, five times safety factor (MannTek)
Coupling Family
Dry Disconnect Coupling
Coupling Type / Variant
Hose unit (moving half, with swivel)
End A Configuration
DDC bayonet interface to STANAG 3756 / ASTM F1122, with valve
End B Configuration
Female BSP or NPT thread, or flange (ANSI, EN, TW, TTMA, JIS)
Size Range
1" to 8" (socket Ø 56 to 272 mm)
Working Pressure
10 to 25 bar by body material, five times safety factor (MannTek)
SERV
MannTek DDC Operating manual
service_manual · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The hose unit is the moving half of a MannTek Dry Disconnect Coupling (DDC). It has an integrated swivel and handles, and is fitted to hose assemblies and loading arms for temporary connection to a DDC tank unit on a storage tank, container, tanker or manifold. Turning the handles couples the halves and opens the valves in both in one motion; turning back closes them before the coupling comes apart, so the hose disconnects with minimal product loss.

The interface follows STANAG 3756 and ASTM F1122, so a hose unit couples to any tank unit of the same size built to that interface.

Design 2.0

The 2" and 3" hose units are MannTek's Design 2.0 generation. MannTek reports up to 43% more flow capacity and up to 55% lower coupling force than the original design, clear alignment indicators and a more compact handle rotation, with the same service design.

Sizes and connections

Seven sizes from 1" (socket Ø 56 mm) to 8" (Ø 272 mm). The hose-side connection is a BSP or NPT thread or a flange to ANSI, EN, TW, TTMA or JIS. MannTek publishes flow capacity from 380 L/min at 1" to 20,000 L/min at 8". The Sizes & Part Numbers tab lists each size.

Construction

  • Body: aluminium, brass or gun metal, stainless steel, titanium, Hastelloy, PVDF or PEEK, depending on size
  • Seals: FKM, NBR, EPDM or FFKM
  • Rubber protecting ring: weather-resistant and electrically non-conductive
  • Inner cam curve, protected from external impact
  • Working pressure: 10 to 25 bar depending on body material, with a five times safety factor (MannTek)

Options and accessories

MannTek builds the DDC hose unit with these options:

  • Colour coding: body, flange and handles in any colour, so each coupling is clearly matched to its medium.
  • Stop before disconnect: if a valve in either half fails to seal, because of damage or a foreign body, a patented blocking function stops the halves being separated, so the operator is not exposed to the medium.
  • Selectivity (coding) system: slots on the tank unit and pins on the hose unit stop the wrong medium being connected; the number of positions depends on the size.
  • Drain connection on the tank or hose unit, for draining, venting and sampling.
  • Locking device: once coupled, the connection locks automatically and cannot loosen by accident, with no change to the tank unit.
  • Hose unit with integrated safety breakaway, where unexpected movement between the loading and unloading points could overload the hose.
  • Special handles made for the application.
  • Pressure bleeding valve: opens at a preset limit where trapped liquid could build up pressure as the line warms.
  • Adapters between DDC (STANAG 3756) and DAC (STANAG 3105) couplings, often used in military fuel handling.
  • Open/close indicator: shows which way to turn the coupling and whether the valves are open or closed.
  • Dust plug with purge capability.
  • Dust caps and dust plugs to keep dirt and water off the coupling faces.
  • Parking device for safe, dedicated storage of the hose unit, with or without a parking sensor.

Options for the tank unit are listed on its own page. Name the options you need when you ask for a quotation and we confirm the MannTek build.

Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.

How to order

Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and list any options. We confirm the MannTek order code, price and lead time with the quotation.

Identification

ParameterValue
Coupling FamilyDry Disconnect Coupling
Coupling Type / VariantHose unit (moving half, with swivel)
Notes2" and 3" supplied in Design 2.0. MannTek order code confirmed with the quotation.
ManufacturerMannTek (Mann Teknik AB), Mariestad, Sweden

Configuration

ParameterValue
End A ConfigurationDDC bayonet interface to STANAG 3756 / ASTM F1122, with valve
End B ConfigurationFemale BSP or NPT thread, or flange (ANSI, EN, TW, TTMA, JIS)

Dimensions

ParameterValue
Size Range1" to 8" (socket Ø 56 to 272 mm)

Construction

ParameterValue
Materials AvailableAluminium, brass, gun metal, stainless steel, titanium, Hastelloy, PVDF, PEEK (by size)
Seal / GasketFKM, NBR, EPDM or FFKM

Performance

ParameterValue
Working Pressure10 to 25 bar by body material, five times safety factor (MannTek)
Flow capacity380 L/min (1") to 20,000 L/min (8"), as published by MannTek

Compliance

ParameterValue
Applicable StandardsConnection interface to STANAG 3756 and ASTM F1122

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at