MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit — 2-1/2"

MannTek DAC hose unit: the moving half of a dry aviation fuel coupling to ISO 45, MS24484 and STANAG 3105, with swivel and yellow handles, for hose assemblies and loading arms. 2-1/2", aluminium, threaded or flanged. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Aviation Coupling
- Coupling Type / Variant: Hose unit (moving half, with swivel)
- End A Configuration: 2-1/2" bayonet interface to ISO 45 / STANAG 3105, with valve
- End B Configuration: Female BSP or NPT thread (1-1/2" to 3"), or flange (EN, ANSI, TW, TTMA, undrilled)
- Size Range: 2-1/2" (DN 65, socket Ø 105 mm)
- Working Pressure: 10 bar (MannTek)
- Coupling Family
- Dry Aviation Coupling
- Coupling Type / Variant
- Hose unit (moving half, with swivel)
- End A Configuration
- 2-1/2" bayonet interface to ISO 45 / STANAG 3105, with valve
- End B Configuration
- Female BSP or NPT thread (1-1/2" to 3"), or flange (EN, ANSI, TW, TTMA, undrilled)
- Size Range
- 2-1/2" (DN 65, socket Ø 105 mm)
- Working Pressure
- 10 bar (MannTek)
Product description
The hose unit is the moving half of a MannTek Dry Aviation Coupling (DAC). It has an integrated swivel and handles and is fitted to hose assemblies and loading arms for temporary connection between storage tanks and aviation refuellers or tank trucks. Turning the handles couples the halves and opens both valves in one motion; turning back closes them before the coupling separates.
The DAC is built to ISO 45, MS24484 and STANAG 3105 with a 2-1/2" bayonet connection, for loading and unloading tank trucks and refuellers, de-fuelling and defence applications.
Specification
- Size: 2-1/2" (DN 65, socket Ø 105 mm), the only size in the DAC range
- Body: aluminium as standard, or stainless steel 1.4408 (AISI 316); no yellow parts in contact with the fuel
- Seals: FKM or NBR, with low-temperature seals available
- Working pressure: 10 bar; flow capacity up to 2,100 L/min (MannTek)
- Threaded (BSP, NPT) or flanged (EN, ANSI, TW, TTMA) connections
Not for into-plane refuelling, and not approved for underwing refuelling.
Connections
The hose unit is listed in aluminium with a choice of female BSP or NPT threads from 1-1/2" to 3", or flanges from DN 65 to 4": EN PN 10/16 and PN 25/40, ANSI Class 150, DIN 28459 TW 1, TTMA, or undrilled. Each is a row in the size table. Special flanges are made to drawing.
Benefits
- Powerful handle, with alternatives for specific uses
- Robust rubber protecting ring, weather-resistant and electrically non-conductive
- Inner cam curve protected from external impact; weight optimised
Options and accessories
MannTek builds the DAC hose unit with these options:
- Colour coding: body, flange and handles in any colour, so each coupling is clearly matched to its medium.
- Drain connection on the tank or hose unit, for draining, venting and sampling.
- Hose unit with electronic sensor: reports whether the valves are open or closed, to start the transfer or to feed a drive-away interlock, with no change to the tank unit.
- Locking device: once coupled, the connection locks automatically and cannot loosen by accident, with no change to the tank unit.
- Hose unit with integrated safety breakaway, where unexpected movement between the loading and unloading points could overload the hose.
- Special handles made for the application.
- Pressure bleeding valve: opens at a preset limit where trapped liquid could build up pressure as the line warms.
- Adapters between DDC (STANAG 3756) and DAC (STANAG 3105) couplings, often used in military fuel handling.
- Dust caps and dust plugs to keep dirt and water off the coupling faces.
- Parking device for safe, dedicated storage of the hose unit, with or without a parking sensor.
Options for the tank unit are listed on its own page. Name the options you need when you ask for a quotation and we confirm the MannTek build.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and list any options. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Aviation Coupling |
| Coupling Type / Variant | Hose unit (moving half, with swivel) |
| Notes | Not for into-plane or underwing refuelling. MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | 2-1/2" bayonet interface to ISO 45 / STANAG 3105, with valve |
| End B Configuration | Female BSP or NPT thread (1-1/2" to 3"), or flange (EN, ANSI, TW, TTMA, undrilled) |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2-1/2" (DN 65, socket Ø 105 mm) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminium; no yellow parts in contact with the medium |
| Seal / Gasket | FKM or NBR; low-temperature seals available |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 10 bar (MannTek) |
| Flow capacity | Up to 2,100 L/min, as published by MannTek |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 45, MS24484, STANAG 3105 |
Shipping & lead time
Sizes & part numbers
16 sizes- Indus part no.IH-MNT-DAC-HU-F-BSP-150
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- —
- Ports
- Female 1-1/2" BSP
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-F-BSP-250
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- —
- Ports
- Female 2-1/2" BSP
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-F-BSP-300
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- —
- Ports
- Female 3" BSP
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-F-NPT-250
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- —
- Ports
- Female 2-1/2" NPT
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-F-NPT-300
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- —
- Ports
- Female 3" NPT
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-DN65-PN16A
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- DN 65 PN 10/16 Type A
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-DN65-PN40B
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- DN 65 PN 25/40 Type B
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-ANSI-250-150
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- 2-1/2" ANSI Class 150
- Ports
- —
- Working pressure (bar)
- 10
Show all 16 sizesShow fewer sizes
- Indus part no.IH-MNT-DAC-HU-DN80-PN16A
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- DN 80 PN 10/16 Type A
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-DN80-PN16B
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- DN 80 PN 10/16 Type B
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-DN80-PN40B
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- DN 80 PN 25/40 Type B
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-ANSI-300-150
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- 3" ANSI Class 150
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-TW1-DN80
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- DIN 28459 "TW 1" / DN 80
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-TTMA-300
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- 3" TTMA
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-TTMA-400
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- 4" TTMA
- Ports
- —
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-DAC-HU-UNDRILLED-210
- Description
- Body: aluminium
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- Undrilled, Ø 210 mm
- Ports
- —
- Working pressure (bar)
- 10
Description — What this part number is, as the manufacturer lists it. Body size — Nominal body size of the coupling, which sets which halves mate. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit and what is it used for?▾
What part numbers does the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit come in, for example IH-MNT-DAC-HU-F-BSP-150?▾
What sizes does the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit come in?▾
What working pressure is the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit rated for?▾
What is the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit made from?▾
What standards does the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit conform to?▾
What does the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit connect to?▾
How does the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit compare with a camlock for fluid transfer?▾
Where is the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit used?▾
Can the DAC be used for into-plane refuelling on the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit?▾
How does the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit differ from the MannTek DAC Dry Aviation Coupling (ISO 45), Tank Unit —?▾
Do you stock the MannTek DAC Dry Aviation Coupling (ISO 45), Hose Unit in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Industrial hose
Dry disconnect vs camlock couplings: when the spill on disconnect matters
A camlock is an open coupling: part it under a full hose and the contents come out. A dry disconnect has a valve in each half that closes before the halves separate. How the two compare, which duties justify a dry disconnect, and what changing over involves.
5 min read
Industrial hose
LPG transfer couplings: dry gas couplings, EN 13175 and replacing open ACME
Open ACME couplings vent LPG every time a bobtail or tanker hose is disconnected. A dry gas coupling closes both halves before they part. What a dry gas coupling is, the standards it is built to, sizes by duty, and how to fit one to existing ACME connections.
3 min read
Industrial hose
Tanker loading and vapour recovery hose: reeling hose, composite and dry disconnects
A fuel tanker uses three different hoses and a coupling that must not drip. What a reeling hose is built for, why vapour recovery is composite, and when a dry disconnect earns its price.
4 min read








