MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit — 2"

MannTek rDME Coupling: a dry gas coupling developed for renewable dimethyl ether (rDME) at any concentration blended into LPG. Anticlockwise connection prevents cross-connection with LPG couplings. 2", stainless steel, FFKM seals, 25 bar. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: rDME Coupling (dry gas)
- Coupling Type / Variant: Tank unit and hose unit; anticlockwise connection
- End A Configuration: rDME dry break interface with valve (anticlockwise, not cross-compatible with DGC)
- End B Configuration: 1-1/2" or 2" BSP, NPT or ACME thread, or ANSI / EN flange
- Size Range: 2" (DN 50, socket Ø 70 mm)
- Working Pressure: Up to 25 bar (MannTek)
- Coupling Family
- rDME Coupling (dry gas)
- Coupling Type / Variant
- Tank unit and hose unit; anticlockwise connection
- End A Configuration
- rDME dry break interface with valve (anticlockwise, not cross-compatible with DGC)
- End B Configuration
- 1-1/2" or 2" BSP, NPT or ACME thread, or ANSI / EN flange
- Size Range
- 2" (DN 50, socket Ø 70 mm)
- Working Pressure
- Up to 25 bar (MannTek)
Product description
MannTek developed the rDME Coupling from its Dry Gas Coupling (DGC) to handle renewable dimethyl ether (rDME) at any concentration, for blending rDME into LPG. It is listed here as tank unit and hose unit in the 2" size.
Why a separate coupling
To keep the highest level of safety and prevent cross-connection in the LPG industry, the rDME Coupling connects with an anticlockwise motion, the opposite of a Dry Gas Coupling. An rDME hose unit therefore cannot be connected to an ordinary DGC tank unit by mistake, or the other way round.
Specification
- Size: 2" (DN 50), socket Ø 70 mm
- Body: stainless steel
- Seals: FFKM
- Working pressure: up to 25 bar; MannTek optimised connection and disconnection at these higher pressures
- Threaded (1-1/2" or 2" BSP, NPT or ACME) or flanged (ANSI, EN) connections, on tank unit and hose unit
- Flow: up to 900 L/min (MannTek)
Where it is used
Loading and unloading road and rail tankers and ships, bobtails, and delivery to customer storage tanks: the same duties as a Dry Gas Coupling, for terminals and distributors handling rDME blends.
MannTek's LPG business development team presents the coupling in a video on MannTek's site. Like the DGC it opens the valves in both halves in one motion and closes them before the halves separate, so the line disconnects with minimal product loss.
MannTek's future-fuel range also covers LNG, methanol, ammonia, hydrogen and carbon capture. The LNG and cryogenic couplings, breakaways and emergency release couplings are on our LNG & Cryogenic Couplings shelf.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the half (tank unit or hose unit), the connection (BSP, NPT or ACME thread, or ANSI / EN flange) and the rDME blend. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | rDME Coupling (dry gas) |
| Coupling Type / Variant | Tank unit and hose unit; anticlockwise connection |
| Notes | MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
| Medium | rDME at any concentration blended into LPG |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | rDME dry break interface with valve (anticlockwise, not cross-compatible with DGC) |
| End B Configuration | 1-1/2" or 2" BSP, NPT or ACME thread, or ANSI / EN flange |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2" (DN 50, socket Ø 70 mm) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Stainless steel |
| Seal / Gasket | FFKM |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | Up to 25 bar (MannTek) |
| Flow capacity | Up to 900 L/min, as published by MannTek |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-MNT-RDME-TU-050
- Description
- Body: stainless steel. Seals: FFKM
- Type
- Tank unit
- Body size
- Ø 70 mm
- Nominal size
- 2" (DN 50)
- Max flow (L/min)
- 900
- Mount
- ANSI, EN
- Ports
- 1-1/2", 2" BSP, NPT, ACME
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-RDME-HU-050
- Description
- Body: stainless steel. Seals: FFKM
- Type
- Hose unit
- Body size
- Ø 70 mm
- Nominal size
- 2" (DN 50)
- Max flow (L/min)
- 900
- Mount
- ANSI, EN
- Ports
- 1-1/2", 2" BSP, NPT, ACME
- Working pressure (bar)
- 25
Description — What this part number is, as the manufacturer lists it. Type — Which part of the coupling this is: coupler (female half), nipple (male half), complete set, dust cap or adapter. Body size — Nominal body size of the coupling, which sets which halves mate. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit and what is it used for?▾
What part numbers does the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit come in, for example IH-MNT-RDME-TU-050?▾
What sizes does the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit come in?▾
What working pressure is the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit rated for?▾
What is the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit made from?▾
What does the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit connect to?▾
How does the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit compare with a camlock for fluid transfer?▾
Where is the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit used?▾
Which sizes are available on the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit?▾
Can I use a standard Dry Gas Coupling for rDME blends on the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit?▾
How does the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit differ from the MannTek DGC Dry Gas Coupling for LPG, Hose Unit — 1" to 8"?▾
Can I buy the MannTek rDME Coupling for rDME and LPG Blends, Tank and Hose Unit from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








