MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit — 1" to 3"

MannTek DEC hose unit: a dry disconnect coupling with minimal dead space and FDA-approved wetted parts for chemical, food and pharmaceutical transfer. 1" to 3", stainless steel or Hastelloy, 25 bar, PED and ATEX 3G. Supplied by Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Evotek Coupling
- Coupling Type / Variant: Hose unit (moving half)
- End A Configuration: DEC dry break interface with valve
- End B Configuration: Female BSP or NPT thread, or one-piece EN flange (eccentric available)
- Size Range: 1", 1-1/4", 1-1/2", 2", 3" (DN 25 to DN 80)
- Working Pressure: 25 bar (MannTek)
- Coupling Family
- Dry Evotek Coupling
- Coupling Type / Variant
- Hose unit (moving half)
- End A Configuration
- DEC dry break interface with valve
- End B Configuration
- Female BSP or NPT thread, or one-piece EN flange (eccentric available)
- Size Range
- 1", 1-1/4", 1-1/2", 2", 3" (DN 25 to DN 80)
- Working Pressure
- 25 bar (MannTek)
Product description
The hose unit is the moving half of a MannTek Dry Evotek Coupling, fitted to the transfer hose. The 1" and 1-1/4" hose units have a knurled sleeve; from 1-1/2" the hose unit has a handwheel that also works as a protective ring, in composite (standard) or aluminium.
MannTek developed the Dry Evotek Coupling (DEC) for the chemical, food and pharmaceutical industries. Dead spaces are kept to a minimum, so very little medium can collect inside the coupling: it drains and cleans well and the risk of product contamination is much lower. The coupling mechanism sits on the outside, which also makes the coupling itself easier to clean.
Like every MannTek dry coupling, the DEC opens the valves in both halves in one motion when it is connected and closes them before the halves separate. MannTek builds it to PED 2014/68/EU article 4.3 and ATEX 2014/34/EU category 3G, for liquid media and liquefied gases.
Sizes and connections
Five sizes: 1" (DN 25), 1-1/4" (DN 32), 1-1/2" (DN 40), 2" (DN 50) and 3" (DN 80). Threaded connections are BSP or NPT, and flanges are to EN. Each size is a row in the Sizes & Part Numbers tab.
Construction
- Body: stainless steel 1.4408 (AISI 316) or Hastelloy, machined from solid bar
- Flanged versions in one piece, with no screwed or welded flanges; eccentric-flange versions available
- Seals: FKM, NBR, FFKM or PTFE
- All wetted parts FDA-approved (MannTek)
- Working pressure: 25 bar (MannTek)
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the body material (stainless steel or Hastelloy), the connection (BSP or NPT thread size, or EN flange rating), the seal material and the medium. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Evotek Coupling |
| Coupling Type / Variant | Hose unit (moving half) |
| Notes | MannTek order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | DEC dry break interface with valve |
| End B Configuration | Female BSP or NPT thread, or one-piece EN flange (eccentric available) |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1", 1-1/4", 1-1/2", 2", 3" (DN 25 to DN 80) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Stainless steel 1.4408 (AISI 316) or Hastelloy, from solid bar |
| Seal / Gasket | FKM, NBR, FFKM or PTFE |
| Dead space | Minimised, with the coupling mechanism outside the media path (MannTek) |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 25 bar (MannTek) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | PED 2014/68/EU art. 4.3; ATEX 2014/34/EU category 3G; wetted parts FDA-approved |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-MNT-DEC-HU-025
- Description
- Body: stainless steel 1.4408 (AISI 316) or Hastelloy
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Mount
- EN
- Ports
- BSP, NPT
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DEC-HU-032
- Description
- Body: stainless steel 1.4408 (AISI 316) or Hastelloy
- Body size
- —
- Nominal size
- 1-1/4" (DN 32)
- Mount
- EN
- Ports
- BSP, NPT
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DEC-HU-040
- Description
- Body: stainless steel 1.4408 (AISI 316) or Hastelloy
- Body size
- —
- Nominal size
- 1-1/2" (DN 40)
- Mount
- EN
- Ports
- BSP, NPT
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DEC-HU-050
- Description
- Body: stainless steel 1.4408 (AISI 316) or Hastelloy
- Body size
- Ø 70 mm
- Nominal size
- 2" (DN 50)
- Mount
- EN
- Ports
- BSP, NPT
- Working pressure (bar)
- 25
- Indus part no.IH-MNT-DEC-HU-080
- Description
- Body: stainless steel 1.4408 (AISI 316) or Hastelloy
- Body size
- Ø 119 mm
- Nominal size
- 3" (DN 80)
- Mount
- EN
- Ports
- BSP, NPT
- Working pressure (bar)
- 25
Description — What this part number is, as the manufacturer lists it. Body size — Nominal body size of the coupling, which sets which halves mate. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit and what is it used for?▾
What part numbers does the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit come in, for example IH-MNT-DEC-HU-025?▾
What sizes does the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit come in?▾
Which body sizes does the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit list?▾
What working pressure is the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit rated for?▾
What is the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit made from?▾
What standards does the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit conform to?▾
What does the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit connect to?▾
How does the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit compare with a camlock for fluid transfer?▾
Where is the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit used?▾
What makes the DEC suited to food and pharmaceutical transfer on the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit?▾
Do you stock the MannTek DEC Dry Evotek Coupling for Chemical, Food and Pharma, Hose Unit in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








