Kuriyama Chemical Hose Assemblies

Kuriyama Chemical Hose Assemblies, 3/8" to 3/4": 9 part numbers.
Product description
Kuriyama Chemical Hose Assemblies, 3/8" to 3/4": 9 part numbers.
Specification
- Type: Hose Assembly
- Size range: 3/8" to 3/4"
- Temperature: +15°F to +160°F
- Part numbers: 9
Sizes and part numbers
The Sizes & Part Numbers tab lists every Kuriyama part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Kuriyama part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Chemicals | Air, Fertilizers, Fresh Water, Fungicides, Herbicides |
| Hose Configuration | Coupled Assembly |
| Hose Cover Material | PVC |
| Hose Fitting A Material | Stainless Steel |
| Hose Fitting A Material Grade | Grade 316 |
| Hose Fitting A Type | MNPT |
| Hose Fitting B Grade | Grade 316 |
| Hose Fitting B Material | Stainless Steel |
| Hose Fitting B Type | MNPT |
| Safety Factor | 4:1 |
| Static Control Wire | No |
Shipping & lead time
Sizes & part numbers
9 sizes- Kuriyama part no.A1661-6-100-SSMPT
- Description
- Chemical Hose Assembly, 3/8 Inch Hose Inside Dia, Yellow, 100 ft Hose Length
- Hose bore
- —
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-6-25-SSMPT
- Description
- Chemical Hose Assembly, 3/8 Inch Hose Inside Dia, Yellow, 25 ft Hose Length
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-6-50-SSMPT
- Description
- Chemical Hose Assembly, 3/8 Inch Hose Inside Dia, Yellow, 50 ft Hose Length
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-8-100-SSMPT
- Description
- Chemical Hose Assembly, 1/2 Inch Hose Inside Dia, Yellow, 100 ft Hose Length
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 76.2
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-8-50-SSMPT
- Description
- Chemical Hose Assembly, 1/2 Inch Hose Inside Dia, Yellow, 50 ft Hose Length
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 76.2
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-8-25-SSMPT
- Description
- Chemical Hose Assembly, 1/2 Inch Hose Inside Dia, Yellow, 25 ft Hose Length
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 76.2
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-12-100-SSMPT
- Description
- Chemical Hose Assembly, 3/4 Inch Hose Inside Dia, Yellow, 100 ft Hose Length
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 101.6
- Working pressure (bar)
- 21
- Kuriyama part no.A1661-12-25-SSMPT
- Description
- Chemical Hose Assembly, 3/4 Inch Hose Inside Dia, Yellow, 25 ft Hose Length
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 101.6
- Working pressure (bar)
- 21
Show all 9 sizesShow fewer sizes
- Kuriyama part no.A1661-12-50-SSMPT
- Description
- Chemical Hose Assembly, 3/4 Inch Hose Inside Dia, Yellow, 50 ft Hose Length
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 101.6
- Working pressure (bar)
- 21
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What are Kuriyama chemical hose assemblies and what are they used for?▾
How do I read the Kuriyama part number A1661-6-100-SSMPT?▾
What sizes and lengths do Kuriyama chemical hose assemblies come in?▾
Which Kuriyama chemical hose assembly length should I choose?▾
What pressure do Kuriyama chemical hose assemblies have?▾
What are Kuriyama chemical hose assemblies made from?▾
What safety factor applies to Kuriyama chemical hose assemblies?▾
What do I connect to a Kuriyama chemical hose assembly?▾
How do I handle a Kuriyama chemical hose assembly?▾
How do Kuriyama chemical hose assemblies differ from the Aeroquip chemical hose assemblies?▾
Where are Kuriyama chemical hose assemblies made, and can you ship them from Dubai?▾
Can I buy the Kuriyama chemical hose assemblies from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Gulf operating conditions
Desalination and water treatment: seawater is not the difficult part
Brine, chlorine, antiscalants and cleaning chemicals all pass through hose on a desalination plant, and they are chemically very different from each other. Selecting on "water" gets it wrong.
3 min read
Industrial hose
Oil suction and discharge hose: aromatics, vacuum and the static wire
An oil hose is chosen on three things a water hose never asks about: how aromatic the oil is, whether the hose must hold vacuum, and how static is carried away. Our range, read on those three.
5 min read
Industrial hose
UHMWPE chemical hose: what the lining resists, and what it does not
Ultra-high molecular weight polyethylene is the lining on most rubber chemical hose. What it gives you, the temperature and pressure limits on our two grades, and when composite or PTFE is the better answer.
4 min read







