Kuriyama Bulk Chemical Hoses

Kuriyama Bulk Chemical Hoses, 3/8" to 3/4": 3 part numbers.
Product description
Kuriyama Bulk Chemical Hoses, 3/8" to 3/4": 3 part numbers.
Specification
- Type: Hose
- Size range: 3/8" to 3/4"
- Temperature: +15°F to +160°F
- Cover Material: PVC
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Kuriyama part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Kuriyama part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Chemicals | Air, Fertilizers, Fresh Water, Fungicides, Herbicides |
| Cover Material | PVC |
| Hose Configuration | Bulk Hose |
| Safety Factor | 4:1 |
| Static Control Wire | No |
| Tube Material | PVC |
Shipping & lead time
Sizes & part numbers
3 sizes- Kuriyama part no.A1661-08-300
- Description
- Bulk Chemical Hose, 1/2 Inch Inside Dia, 3 Inch Bend Radius, 300 ft Length
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 76.2
- Kuriyama part no.A1661-12-300
- Description
- Bulk Chemical Hose, 3/4 Inch Inside Dia, 4 Inch Bend Radius, 300 ft Length
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 101.6
- Kuriyama part no.A1661-06-300
- Description
- Bulk Chemical Hose, 3/8 Inch Inside Dia, 2 Inch Bend Radius, 300 ft Length
- Hose bore
- -06 · 3/8"
- Min bend radius (mm)
- 50.8
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What are Kuriyama bulk chemical hoses and what are they used for?▾
How do I read the Kuriyama part numbers A1661-06-300, A1661-08-300 and A1661-12-300?▾
What sizes and bend radii do Kuriyama bulk chemical hoses come in?▾
How do I choose a Kuriyama bulk chemical hose for my chemical?▾
What pressure rating do Kuriyama bulk chemical hoses have?▾
What are Kuriyama bulk chemical hoses made from?▾
What safety factor applies to Kuriyama bulk chemical hoses?▾
What fittings fit a Kuriyama bulk chemical hose?▾
How do I cut and handle Kuriyama bulk chemical hose?▾
How do Kuriyama bulk chemical hoses differ from the Kuriyama chemical hose assemblies?▾
Where are Kuriyama bulk chemical hoses made, and can you ship them from Dubai?▾
Are the Kuriyama bulk chemical hoses in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Gulf operating conditions
Desalination and water treatment: seawater is not the difficult part
Brine, chlorine, antiscalants and cleaning chemicals all pass through hose on a desalination plant, and they are chemically very different from each other. Selecting on "water" gets it wrong.
3 min read
Industrial hose
Oil suction and discharge hose: aromatics, vacuum and the static wire
An oil hose is chosen on three things a water hose never asks about: how aromatic the oil is, whether the hose must hold vacuum, and how static is carried away. Our range, read on those three.
5 min read
Industrial hose
UHMWPE chemical hose: what the lining resists, and what it does not
Ultra-high molecular weight polyethylene is the lining on most rubber chemical hose. What it gives you, the temperature and pressure limits on our two grades, and when composite or PTFE is the better answer.
4 min read







