Forelock Shackle

Forelock Shackle, in 7 sizes. Indus part numbers.
Key features
- Product type: Forelock Shackle
- Size range: 19 mm to 42 mm
Product description
Forelock shackle with a wedge-locked pin.
Sizes
7 sizes, from 19 mm to 42 mm. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
No load rating is published for this item. We confirm the rating with the quotation; do not load it until you have that rating in writing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Forelock Shackle |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 19 mm to 42 mm |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-MR-CN-FLS-0190
- Size
- 19 mm
- A (mm)
- 26
- B (mm)
- 34
- C (mm)
- 26
- D (mm)
- 114
- E (mm)
- 42
- F (mm)
- 46
- Indus part no.IH-MR-CN-FLS-0220
- Size
- 22 mm
- A (mm)
- 32
- B (mm)
- 39
- C (mm)
- 32
- D (mm)
- 132
- E (mm)
- 48
- F (mm)
- 52
- Indus part no.IH-MR-CN-FLS-0260
- Size
- 26 mm
- A (mm)
- 38
- B (mm)
- 46
- C (mm)
- 38
- D (mm)
- 156
- E (mm)
- 56
- F (mm)
- 61
- Indus part no.IH-MR-CN-FLS-0320
- Size
- 32 mm
- A (mm)
- 46
- B (mm)
- 57
- C (mm)
- 46
- D (mm)
- 192
- E (mm)
- 69
- F (mm)
- 76
- Indus part no.IH-MR-CN-FLS-0340
- Size
- 34 mm
- A (mm)
- 48
- B (mm)
- 62
- C (mm)
- 48
- D (mm)
- 204
- E (mm)
- 74
- F (mm)
- 80
- Indus part no.IH-MR-CN-FLS-0380
- Size
- 38 mm
- A (mm)
- 54
- B (mm)
- 69
- C (mm)
- 54
- D (mm)
- 228
- E (mm)
- 85
- F (mm)
- 92
- Indus part no.IH-MR-CN-FLS-0420
- Size
- 42 mm
- A (mm)
- 59
- B (mm)
- 75
- C (mm)
- 59
- D (mm)
- 252
- E (mm)
- 92
- F (mm)
- 100
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Forelock Shackle used for?▾
What sizes does the Forelock Shackle come in?▾
How do I choose the right size of Forelock Shackle?▾
What load rating does the Forelock Shackle have?▾
What do I send to get a quote for the Forelock Shackle?▾
Forelock Shackle or M-Fairlead Shackle — Stainless Steel: what is the difference?▾
Are the dimensions in the Forelock Shackle size table exact?▾
What certificate comes with the Forelock Shackle?▾
What does the Forelock Shackle connect to?▾
How should the Forelock Shackle be inspected and installed?▾
What are the typical uses of the Forelock Shackle?▾
Does Indus stock the Forelock Shackle in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








