RF Connector Shackle — Grade R4

RF Connector Shackle, in 7 sizes. Indus part numbers.
Key features
- Product type: RF Connector Shackle
- Size range: 70 mm to 102 mm
Product description
Grade R4 connector shackle for 70 to 102 mm offshore chain.
Sizes
7 sizes, from 70 mm to 102 mm. Every size has its own Indus part number in the table below.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | RF Connector Shackle |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 70 mm to 102 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 5,156–10,217 kN |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-MR-CN-RFC-0700
- Size
- 70 mm
- Proof load, grade R4 (kN)
- 4,065
- Min breaking load, grade R4 (kN)
- 5,156
- Indus part no.IH-MR-CN-RFC-0760
- Size
- 76 mm
- Proof load, grade R4 (kN)
- 4,731
- Min breaking load, grade R4 (kN)
- 6,002
- Indus part no.IH-MR-CN-RFC-0830
- Size
- 83 mm
- Proof load, grade R4 (kN)
- 5,560
- Min breaking load, grade R4 (kN)
- 7,053
- Indus part no.IH-MR-CN-RFC-0840
- Size
- 84 mm
- Proof load, grade R4 (kN)
- 5,682
- Min breaking load, grade R4 (kN)
- 7,208
- Indus part no.IH-MR-CN-RFC-0890
- Size
- 89 mm
- Proof load, grade R4 (kN)
- 6,310
- Min breaking load, grade R4 (kN)
- 8,005
- Indus part no.IH-MR-CN-RFC-0950
- Size
- 95 mm
- Proof load, grade R4 (kN)
- 7,096
- Min breaking load, grade R4 (kN)
- 9,002
- Indus part no.IH-MR-CN-RFC-1020
- Size
- 102 mm
- Proof load, grade R4 (kN)
- 8,055
- Min breaking load, grade R4 (kN)
- 10,217
Size — Nominal size as the manufacturer states it. Proof load, grade R4 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load, grade R4 — Minimum breaking load. A test figure — never lift to it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the RF Connector Shackle — Grade R4 used for?▾
What sizes does the RF Connector Shackle — Grade R4 come in?▾
How do I choose the right size of RF Connector Shackle — Grade R4?▾
What are the proof and breaking loads of the RF Connector Shackle — Grade R4?▾
What do I send to get a quote for the RF Connector Shackle — Grade R4?▾
RF Connector Shackle — Grade R4 or H-Connector — Hybrid 76/84 mm, Grade R4: what is the difference?▾
What do the letters in the RF Connector Shackle — Grade R4 size table mean?▾
What certificate comes with the RF Connector Shackle — Grade R4?▾
What does the RF Connector Shackle — Grade R4 connect to?▾
What care does the RF Connector Shackle — Grade R4 need in service?▾
Where is the RF Connector Shackle — Grade R4 used?▾
Does Indus stock the RF Connector Shackle — Grade R4 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








