Forged Ring — S-643 Pattern

Forged Ring, in 5 sizes. Indus part numbers.
Key features
- Product type: Forged Ring
- Pattern / standard: S-643 pattern
- Size range: 22 mm to 50 mm
- Working load limit: 3.26–15.8 t
Product description
Forged ring to the S-643 pattern.
Sizes
5 sizes, from 22 mm to 50 mm. Every size has its own Indus part number in the table below.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Forged Ring |
| Pattern / standard | S-643 pattern |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 22 mm to 50 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 3.26–15.8 t |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-MR-CN-RNG-0220
- Size
- 22 mm
- WLL (t)
- 3.26
- Min breaking load (t)
- 14.27
- Inside dia. (mm)
- 139
- Weight (kg)
- 2
- Indus part no.IH-MR-CN-RNG-0280
- Size
- 28 mm
- WLL (t)
- 4.42
- Min breaking load (t)
- 19.98
- Inside dia. (mm)
- 152.4
- Weight (kg)
- 3
- Indus part no.IH-MR-CN-RNG-0320
- Size
- 32 mm
- WLL (t)
- 7.7
- Min breaking load (t)
- 32.69
- Inside dia. (mm)
- 254
- Weight (kg)
- 6.5
- Indus part no.IH-MR-CN-RNG-0380
- Size
- 38 mm
- WLL (t)
- 11.33
- Min breaking load (t)
- 47.82
- Inside dia. (mm)
- 254
- Weight (kg)
- 10
- Indus part no.IH-MR-CN-RNG-0500
- Size
- 50 mm
- WLL (t)
- 15.8
- Min breaking load (t)
- 94.8
- Inside dia. (mm)
- 304
- Weight (kg)
- 18.5
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Inside dia. — Inside diameter of the ring. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Forged Ring — S-643 Pattern used for?▾
Which sizes of Forged Ring — S-643 Pattern are available?▾
How do I size the Forged Ring — S-643 Pattern for a mooring?▾
What load rating does the Forged Ring — S-643 Pattern have?▾
How do I order the Forged Ring — S-643 Pattern?▾
How does the Forged Ring — S-643 Pattern compare with the Master Link — A-342 Pattern?▾
What do the letters in the Forged Ring — S-643 Pattern size table mean?▾
Which certificate can I get for the Forged Ring — S-643 Pattern?▾
What does the Forged Ring — S-643 Pattern connect to?▾
How should the Forged Ring — S-643 Pattern be inspected and installed?▾
Where is the Forged Ring — S-643 Pattern used?▾
Does Indus stock the Forged Ring — S-643 Pattern in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








