H-Link

H-Link, made to your chain size.
Key features
- Product type: H-Link
Product description
H-link connector for joining chain, wire and fibre rope terminations.
Sizes
Made to the chain it joins. The drawing gives every dimension as a multiple of the chain diameter D, so one design covers the whole range of chain sizes; tell us the chain diameter and grade and we send the dimensioned drawing and weight with the quotation.
No load rating is published for this item. We confirm the rating with the quotation; do not load it until you have that rating in writing.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Send the size or rating you need and we quote with the drawing and certificate.
Identification
| Parameter | Value |
|---|---|
| Product type | H-Link |
Shipping & lead time
What is the H-Link and what is it used for?▾
What sizes does the H-Link come in?▾
How do I choose the right size of H-Link?▾
What load rating does the H-Link have?▾
How do I order the H-Link?▾
How does the H-Link compare with the Weak Link?▾
Does the H-Link come with a dimensional drawing?▾
Which certificate can I get for the H-Link?▾
What does the H-Link connect to?▾
What care does the H-Link need in service?▾
What are the typical uses of the H-Link?▾
Does Indus stock the H-Link in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read








