M-Fairlead Shackle — Stainless Steel

M-Fairlead Shackle, in 2 sizes. Indus part numbers.
Key features
- Product type: M-Fairlead Shackle
- Size range: 30 t SWL to 40 t SWL
- Working load limit: 30–40 t
Product description
Stainless steel M-fairlead shackle.
Sizes
2 sizes, from 30 t SWL to 40 t SWL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | M-Fairlead Shackle |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 30 t SWL to 40 t SWL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 30–40 t |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-MR-CN-MFS-30T
- Size
- 30 t SWL
- WLL (t)
- 30
- A (mm)
- 255
- B (mm)
- 97
- C (mm)
- 120
- D (mm)
- 65
- E (mm)
- 67
- F (mm)
- 100
- R (mm)
- 34
- Indus part no.IH-MR-CN-MFS-40T
- Size
- 40 t SWL
- WLL (t)
- 40
- A (mm)
- 310
- B (mm)
- 121
- C (mm)
- 130
- D (mm)
- 82
- E (mm)
- 90
- F (mm)
- 128
- R (mm)
- 45
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the M-Fairlead Shackle — Stainless Steel and what is it used for?▾
What sizes does the M-Fairlead Shackle — Stainless Steel come in?▾
How do I size the M-Fairlead Shackle — Stainless Steel for a mooring?▾
What is the working load limit of the M-Fairlead Shackle — Stainless Steel?▾
What do I send to get a quote for the M-Fairlead Shackle — Stainless Steel?▾
How does the M-Fairlead Shackle — Stainless Steel compare with the Forelock Shackle?▾
Are the dimensions in the M-Fairlead Shackle — Stainless Steel size table exact?▾
Which certificate can I get for the M-Fairlead Shackle — Stainless Steel?▾
What does the M-Fairlead Shackle — Stainless Steel connect to?▾
How should the M-Fairlead Shackle — Stainless Steel be inspected and installed?▾
Where is the M-Fairlead Shackle — Stainless Steel used?▾
Does Indus stock the M-Fairlead Shackle — Stainless Steel in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








