Quad Plate — Grade 3

Quad Plate. Indus part number.
Key features
- Product type: Quad Plate
- Size range: 690 × 639 × 115 mm, Grade 3
Product description
Four-hole Grade 3 quad plate for multi-line mooring connections.
Configuration
Supplied as one configuration: 690 × 639 × 115 mm, Grade 3. Its Indus part number is in the table below.
No load rating is published for this item. We confirm the rating with the quotation; do not load it until you have that rating in writing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Quad Plate |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 690 × 639 × 115 mm, Grade 3 |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-MR-CN-QDP-690X639
- Size
- 690 × 639 × 115 mm, Grade 3
- Grade
- Grade 3
- H (mm)
- 639
- L (mm)
- 690
- T (mm)
- 115
Size — Nominal size as the manufacturer states it. Grade — Material grade of this row — carbon and alloy versions share a frame but not a rating. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. T — Dimension T on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Quad Plate — Grade 3 and what is it used for?▾
Which sizes of Quad Plate — Grade 3 are available?▾
How do I choose the right size of Quad Plate — Grade 3?▾
What load rating does the Quad Plate — Grade 3 have?▾
How do I order the Quad Plate — Grade 3?▾
How does the Quad Plate — Grade 3 compare with the Triangle Plate (Triplate)?▾
What do the letters in the Quad Plate — Grade 3 size table mean?▾
Which certificate can I get for the Quad Plate — Grade 3?▾
What is the Quad Plate — Grade 3 connected with in a mooring?▾
How should the Quad Plate — Grade 3 be inspected and installed?▾
What are the typical uses of the Quad Plate — Grade 3?▾
Does Indus stock the Quad Plate — Grade 3 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








