Master Link — A-342 Pattern

Master Link, in 6 sizes. Indus part numbers.
Key features
- Product type: Master Link
- Pattern / standard: A-342 pattern
- Size range: 19 mm to 50 mm
- Working load limit: 4.68–44.3 t
Product description
Master link to the A-342 pattern.
Sizes
6 sizes, from 19 mm to 50 mm. Every size has its own Indus part number in the table below.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Master Link |
| Pattern / standard | A-342 pattern |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 19 mm to 50 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 4.68–44.3 t |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-MR-CN-MLK-0190
- Size
- 19 mm
- WLL (t)
- 4.68
- Min breaking load (t)
- 18.72
- Inside length (mm)
- 140
- Inside width (mm)
- 70
- Weight (kg)
- 2
- Indus part no.IH-MR-CN-MLK-0250
- Size
- 25 mm
- WLL (t)
- 11.04
- Min breaking load (t)
- 44.16
- Inside length (mm)
- 177
- Inside width (mm)
- 88
- Weight (kg)
- 3
- Indus part no.IH-MR-CN-MLK-0300
- Size
- 30 mm
- WLL (t)
- 15.94
- Min breaking load (t)
- 63.76
- Inside length (mm)
- 222
- Inside width (mm)
- 111
- Weight (kg)
- 4.5
- Indus part no.IH-MR-CN-MLK-0380
- Size
- 38 mm
- WLL (t)
- 21.7
- Min breaking load (t)
- 86.8
- Inside length (mm)
- 267
- Inside width (mm)
- 133
- Weight (kg)
- 7.5
- Indus part no.IH-MR-CN-MLK-0450
- Size
- 45 mm
- WLL (t)
- 28.35
- Min breaking load (t)
- 113.4
- Inside length (mm)
- 305
- Inside width (mm)
- 152.4
- Weight (kg)
- 12
- Indus part no.IH-MR-CN-MLK-0500
- Size
- 50 mm
- WLL (t)
- 44.3
- Min breaking load (t)
- 177.2
- Inside length (mm)
- 355
- Inside width (mm)
- 178
- Weight (kg)
- 17
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Inside length — Inside length of the link or bow. Inside width — Inside width of the link or jaw. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Master Link — A-342 Pattern used for?▾
What sizes does the Master Link — A-342 Pattern come in?▾
How do I choose the right size of Master Link — A-342 Pattern?▾
What is the working load limit of the Master Link — A-342 Pattern?▾
How do I order the Master Link — A-342 Pattern?▾
Master Link — A-342 Pattern or H-Link: what is the difference?▾
What do the letters in the Master Link — A-342 Pattern size table mean?▾
Which certificate can I get for the Master Link — A-342 Pattern?▾
What is the Master Link — A-342 Pattern connected with in a mooring?▾
How should the Master Link — A-342 Pattern be inspected and installed?▾
Where is the Master Link — A-342 Pattern used?▾
Does Indus stock the Master Link — A-342 Pattern in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








