H-Connector — Hybrid 76/84 mm, Grade R4

H-Connector. Indus part number.
Key features
- Product type: H-Connector
- Size range: 76/84 mm chain
Product description
H-shaped connector joining 76 mm and 84 mm R4 mooring chain.
Configuration
Supplied as one configuration: 76/84 mm chain. Its Indus part number is in the table below.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | H-Connector |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 76/84 mm chain |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 7,208 kN |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-MR-CN-HCN-0760-0840
- Size
- 76/84 mm chain
- Chain size
- 76 / 84 mm
- Proof load, grade R4 (kN)
- 5,682
- Min breaking load, grade R4 (kN)
- 7,208
- A (mm)
- 97
- B (mm)
- 290
- C (mm)
- 658
- D (mm)
- 92
- E (mm)
- 118
- F (mm)
- 101
- G (mm)
- 40
- Weight (kg)
- 208
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Proof load, grade R4 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load, grade R4 — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the H-Connector — Hybrid 76/84 mm, Grade R4 and what is it used for?▾
Which sizes of H-Connector — Hybrid 76/84 mm, Grade R4 are available?▾
How do I choose the right size of H-Connector — Hybrid 76/84 mm, Grade R4?▾
What are the proof and breaking loads of the H-Connector — Hybrid 76/84 mm, Grade R4?▾
How do I order the H-Connector — Hybrid 76/84 mm, Grade R4?▾
How does the H-Connector — Hybrid 76/84 mm, Grade R4 compare with the RF Connector Shackle — Grade R4?▾
Are the dimensions in the H-Connector — Hybrid 76/84 mm, Grade R4 size table exact?▾
What certificate comes with the H-Connector — Hybrid 76/84 mm, Grade R4?▾
What does the H-Connector — Hybrid 76/84 mm, Grade R4 connect to?▾
How should the H-Connector — Hybrid 76/84 mm, Grade R4 be inspected and installed?▾
What are the typical uses of the H-Connector — Hybrid 76/84 mm, Grade R4?▾
Does Indus stock the H-Connector — Hybrid 76/84 mm, Grade R4 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








