T-Mooring Link — Galvanized

T-Mooring Link, in 3 sizes. Indus part numbers.
Key features
- Product type: T-Mooring Link
- Size range: 30 t SWL to 60 t SWL
- Working load limit: 30–60 t
Product description
Galvanized T-mooring link.
Sizes
3 sizes, from 30 t SWL to 60 t SWL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | T-Mooring Link |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 30 t SWL to 60 t SWL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 30–60 t |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-MR-CN-TML-30T
- Size
- 30 t SWL
- WLL (t)
- 30
- A (mm)
- 285
- B (mm)
- 115
- C (mm)
- 136
- D (mm)
- 65
- E (mm)
- 75
- R (mm)
- 22
- Indus part no.IH-MR-CN-TML-40T
- Size
- 40 t SWL
- WLL (t)
- 40
- A (mm)
- 324
- B (mm)
- 142
- C (mm)
- 150
- D (mm)
- 75
- E (mm)
- 90
- R (mm)
- 28
- Indus part no.IH-MR-CN-TML-60T
- Size
- 60 t SWL
- WLL (t)
- 60
- A (mm)
- 350
- B (mm)
- 184
- C (mm)
- 160
- D (mm)
- 85
- E (mm)
- 120
- R (mm)
- 30
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the T-Mooring Link — Galvanized used for?▾
What sizes does the T-Mooring Link — Galvanized come in?▾
How do I choose the right size of T-Mooring Link — Galvanized?▾
What load rating does the T-Mooring Link — Galvanized have?▾
What do I send to get a quote for the T-Mooring Link — Galvanized?▾
T-Mooring Link — Galvanized or H-Link: what is the difference?▾
Are the dimensions in the T-Mooring Link — Galvanized size table exact?▾
What certificate comes with the T-Mooring Link — Galvanized?▾
What is the T-Mooring Link — Galvanized connected with in a mooring?▾
How should the T-Mooring Link — Galvanized be inspected and installed?▾
Where is the T-Mooring Link — Galvanized used?▾
Does Indus stock the T-Mooring Link — Galvanized in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








