Triangle Plate (Triplate)

Triangle Plate (Triplate), in 8 sizes. Indus part numbers.
Key features
- Product type: Triangle Plate (Triplate)
- Size range: 9.5 t WLL to 200 t WLL
- Working load limit: 9.5–200 t
Product description
Triangle plate joining three lines at one point, rated by WLL and breaking load.
Sizes
8 sizes, from 9.5 t WLL to 200 t WLL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Triangle Plate (Triplate) |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 9.5 t WLL to 200 t WLL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 9.5–200 t |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-MR-CN-TRP-9P5T
- Size
- 9.5 t WLL
- WLL (t)
- 9.5
- Min breaking load (t)
- 57
- A (mm)
- 250
- B (mm)
- 230
- C (mm)
- 148
- D (mm)
- 70
- E (mm)
- 75
- F (mm)
- 75
- G (mm)
- 36
- R1 (mm)
- 51
- R2 (mm)
- 19
- R3 (mm)
- 14
- Weight (kg)
- 12.5
- Indus part no.IH-MR-CN-TRP-12T
- Size
- 12 t WLL
- WLL (t)
- 12
- Min breaking load (t)
- 72
- A (mm)
- 287
- B (mm)
- 264
- C (mm)
- 175
- D (mm)
- 80
- E (mm)
- 85
- F (mm)
- 87
- G (mm)
- 42
- R1 (mm)
- 56
- R2 (mm)
- 20
- R3 (mm)
- 16
- Weight (kg)
- 16.5
- Indus part no.IH-MR-CN-TRP-17T
- Size
- 17 t WLL
- WLL (t)
- 17
- Min breaking load (t)
- 102
- A (mm)
- 355
- B (mm)
- 326
- C (mm)
- 215
- D (mm)
- 95
- E (mm)
- 105
- F (mm)
- 102
- G (mm)
- 50
- R1 (mm)
- 70
- R2 (mm)
- 25
- R3 (mm)
- 20
- Weight (kg)
- 33.5
- Indus part no.IH-MR-CN-TRP-35T
- Size
- 35 t WLL
- WLL (t)
- 35
- Min breaking load (t)
- 210
- A (mm)
- 507
- B (mm)
- 469
- C (mm)
- 287
- D (mm)
- 130
- E (mm)
- 143
- F (mm)
- 140
- G (mm)
- 70
- R1 (mm)
- 110
- R2 (mm)
- 34
- R3 (mm)
- 25
- Weight (kg)
- 83.5
- Indus part no.IH-MR-CN-TRP-55T
- Size
- 55 t WLL
- WLL (t)
- 55
- Min breaking load (t)
- 330
- A (mm)
- 600
- B (mm)
- 553
- C (mm)
- 350
- D (mm)
- 167
- E (mm)
- 167
- F (mm)
- 180
- G (mm)
- 90
- R1 (mm)
- 125
- R2 (mm)
- 40
- R3 (mm)
- 32
- Weight (kg)
- 123
- Indus part no.IH-MR-CN-TRP-85T
- Size
- 85 t WLL
- WLL (t)
- 85
- Min breaking load (t)
- 510
- A (mm)
- 690
- B (mm)
- 639
- C (mm)
- 399
- D (mm)
- 185
- E (mm)
- 195
- F (mm)
- 199
- G (mm)
- 115
- R1 (mm)
- 145
- R2 (mm)
- 46
- R3 (mm)
- 40
- Weight (kg)
- 191
- Indus part no.IH-MR-CN-TRP-120T
- Size
- 120 t WLL
- WLL (t)
- 120
- Min breaking load (t)
- 720
- A (mm)
- 825
- B (mm)
- 762
- C (mm)
- 475
- D (mm)
- 219
- E (mm)
- 230
- F (mm)
- 237
- G (mm)
- 125
- R1 (mm)
- 175
- R2 (mm)
- 55
- R3 (mm)
- 45
- Weight (kg)
- 357
- Indus part no.IH-MR-CN-TRP-200T
- Size
- 200 t WLL
- WLL (t)
- 200
- Min breaking load (t)
- 1,200
- A (mm)
- 1,089
- B (mm)
- 1,006
- C (mm)
- 627
- D (mm)
- 270
- E (mm)
- 300
- F (mm)
- 289
- G (mm)
- 165
- R1 (mm)
- 231
- R2 (mm)
- 73
- R3 (mm)
- 59
- Weight (kg)
- 830
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. R1 — Dimension R1 on the manufacturer dimension drawing. R2 — Dimension R2 on the manufacturer dimension drawing. R3 — Dimension R3 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Triangle Plate (Triplate) and what is it used for?▾
What sizes does the Triangle Plate (Triplate) come in?▾
How do I size the Triangle Plate (Triplate) for a mooring?▾
What load rating does the Triangle Plate (Triplate) have?▾
How do I order the Triangle Plate (Triplate)?▾
How does the Triangle Plate (Triplate) compare with the Quad Plate — Grade 3?▾
Are the dimensions in the Triangle Plate (Triplate) size table exact?▾
Which certificate can I get for the Triangle Plate (Triplate)?▾
What is the Triangle Plate (Triplate) connected with in a mooring?▾
What care does the Triangle Plate (Triplate) need in service?▾
What are the typical uses of the Triangle Plate (Triplate)?▾
Can I buy the Triangle Plate (Triplate) ex-stock from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








