Sun Hydraulics Electro-Proportional Pilot-Operated Relief Valve (740 Series) — RPEP

Sun Hydraulics electro-proportional pilot-operated relief valve: RPEP, series 1, 25 gpm (95 L/min), T-10A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Electro-Proportional Pilot-Operated Relief Valve
- Capacity: 25 gpm (95 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-10A
- Valve function
- Electro-Proportional Pilot-Operated Relief Valve
- Series (frame sizes)
- 1
- Cavity
- T-10A
Product description
A 2-port, pilot-operated relief cartridge whose setting is controlled by a proportional solenoid, giving step-less electronic control of system pressure at full flow.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- RPEP — series 1, T-10A cavity, 25 gpm (95 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 2 in³/min.@1000 psi (30 cc/min.@70 bar)
Configuration options
The letters after the base model code choose these options (shown for RPEP; a size may add or drop a choice):
- Control: M — Manual Override, X — No Manual Override
- Setting range: A — 150 - 3000 psi (10.5 - 206 bar), W — 150 - 5000 psi (10,5 - 350 bar)
- Seal material: N — Buna-N, V — Viton
Selection notes
- Coil voltage and connector are configuration options.
- Use with a proportional driver and dither as recommended in the data.
Where it is used
Electronically controlled pressure on presses, winches, fan drives and test stands.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990010007, Viton: 990010006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RPEPXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990010007, Viton: 990010006 |
| Weight | .40 lb (0,20 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | M — Manual Override, X — No Manual Override |
| Seal material | N — Buna-N, V — Viton |
Identification
| Parameter | Value |
|---|---|
| Valve function | Electro-Proportional Pilot-Operated Relief Valve |
| Series (frame sizes) | 1 |
| Cavity | T-10A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 25 gpm (95 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 150 - 3000 psi (10.5 - 206 bar), W — 150 - 5000 psi (10,5 - 350 bar) |
| Max leakage | 2 in³/min.@1000 psi (30 cc/min.@70 bar) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.RPEP
- Series
- 1
- Cavity
- T-10A
- Capacity
- 25 gpm / 95 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) (RPEP) and what does it do?▾
How do I read the Sun model code for the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) (RPEP)?▾
What sizes and flow capacities does the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) come in?▾
What pressure and setting range does the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) have?▾
Which seal and material options does the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) come with?▾
How is the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) adjusted, and which control options are offered?▾
Which seal kit fits the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) (RPEP)?▾
Which cavity and installation torque does the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) need?▾
Where is the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) used?▾
How does the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) differ from the Sun Electro-Proportional Relief Valve, Pilot Capacity?▾
What happens if the signal is lost on the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series)?▾
Can I buy the Sun Electro-Proportional Pilot-Operated Relief Valve (740 Series) from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Typ 740
- fr
- union à marteau type 740
- es
- unión de martillo tipo 740
- it
- giunto a martello tipo 740








