Sun Hydraulics Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity — PPDB8, PPFB8, PPHB8, PPJB8, Series 1 to 4

Sun Hydraulics reducing/relieving main stage with T-8A pilot cavity: PPDB8, PPFB8, PPHB8, PPJB8, series 1 to 4, 10 gpm to 80 gpm (40 L/min to 320 L/min), T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Reducing/Relieving Main Stage with T-8A Pilot Cavity
- Capacity: 10 gpm to 80 gpm (40 L/min to 320 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A, T-2A, T-17A, T-19A
- Valve function
- Reducing/Relieving Main Stage with T-8A Pilot Cavity
- Series (frame sizes)
- 1 to 4
- Cavity
- T-11A, T-2A, T-17A, T-19A
Product description
A 3-way, normally open reducing/relieving main stage with an integral T-8A pilot cavity. The pilot cartridge fitted there sets the difference between the reduced pressure at port 1 and tank at port 3; the main stage carries the full flow both ways.
Sizes and cavities
Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:
- PPDB8 — series 1, T-11A cavity, 10 gpm (40 L/min)
- PPFB8 — series 2, T-2A cavity, 20 gpm (80 L/min)
- PPHB8 — series 3, T-17A cavity, 40 gpm (160 L/min)
- PPJB8 — series 4, T-19A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for PPDB8; a size may add or drop a choice):
- Setting range: D — 25 psi (1,7 bar), W — 100 psi (7 bar)
- Seal material: N — Buna-N, V — Viton
Selection notes
- The T-8A pilot cartridge is ordered separately.
- Pressure at port 3 adds one-for-one to the setting; keep it under 3,000 psi (210 bar).
- Variants add a port-4 drain, a drilled piston orifice or an open transition.
Where it is used
Remote or electro-proportional control of a reduced-pressure circuit from one cavity.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PPDB8WN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Reducing/Relieving Main Stage with T-8A Pilot Cavity |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-11A, T-2A, T-17A, T-19A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .30 lb (0,15 kg) to 3.10 lb (1,40 kg) |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm to 80 gpm (40 L/min to 320 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | D — 25 psi (1,7 bar), W — 100 psi (7 bar) |
Configuration
| Parameter | Value |
|---|---|
| Seal material | N — Buna-N, V — Viton |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.PPDB8
- Series
- 1
- Cavity
- T-11A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PPFB8
- Series
- 2
- Cavity
- T-2A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PPHB8
- Series
- 3
- Cavity
- T-17A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PPJB8
- Series
- 4
- Cavity
- T-19A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity (PPDB8, PPFB8, PPHB8 and others) and what does it do?▾
What does the Sun model code for the PPDB8 valve mean?▾
What sizes and flow capacities does the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity come in?▾
What pressure and setting range does the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity have?▾
Which seal and material options does the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity come with?▾
How is the setting of the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity chosen?▾
Which seal kit fits the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity (PPDB8, PPFB8, PPHB8 and others)?▾
Which cavity and installation torque does the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity need?▾
Where is the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity used?▾
How does the Sun PPDB8 valve differ from the Sun Pilot-Operated, Pressure Reducing Main Stage with Integral T-8A Control Cavity?▾
Does pressure in the tank line change the setting on the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity?▾
Is the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Integral T-8A Control Cavity in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione








