Skip to content
SUN HYDRAULICSIH-SUN-PR-C

Sun Hydraulics Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition — PRBC, PRDC, Series 0 to 1

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics PRDC direct-acting reducing/relieving valve with open transition, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics PRDC direct-acting reducing/relieving valve with open transition, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics direct-acting reducing/relieving valve with open transition: PRBC, PRDC, series 0 to 1, 5 gpm to 10 gpm (20 L/min to 40 L/min), T-163A, T-11A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Direct-Acting Reducing/Relieving Valve with Open Transition
  • Capacity: 5 gpm to 10 gpm (20 L/min to 40 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-163A, T-11A
Valve function
Direct-Acting Reducing/Relieving Valve with Open Transition
Series (frame sizes)
0 to 1
Cavity
T-163A, T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting reducing/relieving cartridge that stays slightly open as it moves from reducing to relieving. That gives tighter pressure control and quicker response, in exchange for a small, steady flow to tank.

Sizes and cavities

Sun Hydraulics builds this valve in 2 sizes. The series sets the cavity it screws into and its flow capacity:

  • PRBC — series 0, T-163A cavity, 5 gpm (20 L/min), 0-series
  • PRDC — series 1, T-11A cavity, 10 gpm (40 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 20 in³/min. (330 cc/min)

Configuration options

The letters after the base model code choose these options (shown for PRDC; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
  • Setting range: A — 500 - 3000 psi (35 - 210 bar), 700 psi (50 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 200 psi (14 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, S — 25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting, W — 750 - 4500 psi (50 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated

Option rules: If the modifier is /AP, the control must be C or L; If the seal is E, the control must be C,K,L or O.

Selection notes

  • Leakage out of port 3 is higher by design; it rises with pressure difference.
  • Pressure at port 3 adds one-for-one to the setting; keep it under 3,000 psi (210 bar).

Where it is used

Pressure control where dynamic response matters more than leakage — pilot supplies and proportional circuits.

Installation and seal kits

Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 0: Buna: 990163007, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PRDCLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionDirect-Acting Reducing/Relieving Valve with Open Transition
Series (frame sizes)0 to 1
CavityT-163A, T-11A

Performance

ParameterValue
Capacity5 gpm to 10 gpm (20 L/min to 40 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 500 - 3000 psi (35 - 210 bar), 700 psi (50 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 200 psi (14 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, S — 25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting, W — 750 - 4500 psi (50 - 315 bar), 1000 psi (70 bar) Standard Setting
Max leakage20 in³/min. (330 cc/min)

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
Seal materialN — Buna-N, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm), 7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 0: Buna: 990163007, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006
Weight.30 lb (0,15 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Reduzierung
fr
réducteur
es
reductor
it
riduzione
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at