Skip to content
SUN HYDRAULICSIH-SUN-PRDG

Sun Hydraulics Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve (740 Series) — PRDG

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics PRDG electro-proportional reducing/relieving valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics PRDG electro-proportional reducing/relieving valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics electro-proportional reducing/relieving valve: PRDG, series 1, 5 gpm (20 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional Reducing/Relieving Valve
  • Capacity: 5 gpm (20 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A
Valve function
Electro-Proportional Reducing/Relieving Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting reducing/relieving cartridge set by a proportional solenoid. The coil current sets the reduced pressure at port 1; if port 1 rises above it, the valve relieves to tank at port 3. Most versions are closed in the transition between reducing and relieving, so they use very little oil.

Sizes and cavities

Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:

  • PRDG — series 1, T-11A cavity, 5 gpm (20 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 2.5 in³/min. (41 cc/min)

Configuration options

The letters after the base model code choose these options (shown for PRDG; a size may add or drop a choice):

  • Control: M — Manual Override (Standard), X — No Manual Override
  • Seal material: N — Buna-N, V — Viton

Option rules: If the coil is in this group (211, 212, 212D, 214, 214D, 223, 224, 224D, 228, 228D, 912D, 914, 914D, 924, 924D, 928, 928D, JM24BD, JM24CD, JN24BD, JN24CD), the range must be B, D, E or S; If the coil is in this group (212X01, 212X02, 214X01, 214X02, 224X01, 224X02, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912X01, 912X02, 914X01, 914X02, 924X01, 924X02, 928X01, 928X02), the range must be B, D or E; If the coil is in this group (912), the range must be D, E, B or S.

Selection notes

  • Standard versions rise with current; 'high setting with no command' versions fall with current.
  • Variants add a port-4 drain, an open transition or 740-Series coils; the coil is an ordering option.
  • Use a driver with current control and dither.

Where it is used

Electronic pilot-pressure control of mobile and industrial valves, clutches, brakes and pump displacement.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990511007, Viton: 990511006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PRDGMDN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Performance

ParameterValue
Capacity5 gpm (20 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage2.5 in³/min. (41 cc/min)

Identification

ParameterValue
Valve functionElectro-Proportional Reducing/Relieving Valve
Series (frame sizes)1
CavityT-11A

Configuration

ParameterValue
Control / adjustmentM — Manual Override (Standard), X — No Manual Override
Seal materialN — Buna-N, V — Viton

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990511007, Viton: 990511006

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Hammerverschraubung Typ 740 Reduzierung
fr
union à marteau type 740 réducteur
es
unión de martillo tipo 740 reductor
it
giunto a martello tipo 740 riduzione
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at