Sun Hydraulics Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve — PPFC, PPHC, PPJC, Series 2 to 4

Sun Hydraulics air-controlled pressure reducing/relieving valve, 20:1 pilot ratio: PPFC, PPHC, PPJC, series 2 to 4, 20 gpm to 80 gpm (80 L/min to 320 L/min), T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Air-Controlled Pressure Reducing/Relieving Valve
- Capacity: 20 gpm to 80 gpm (80 L/min to 320 L/min)
- Max operating pressure: 2000 psi (140 bar)
- Cavity: T-2A, T-17A, T-19A
- Valve function
- Air-Controlled Pressure Reducing/Relieving Valve
- Series (frame sizes)
- 2 to 4
- Cavity
- T-2A, T-17A, T-19A
Product description
A pilot-operated reducing/relieving cartridge set by compressed air on a diaphragm. The reduced hydraulic pressure at port 1 follows the air pressure at 20:1, and port 1 is relieved to tank at full flow if driven above it.
Sizes and cavities
Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:
- PPFC — series 2, T-2A cavity, 20 gpm (80 L/min)
- PPHC — series 3, T-17A cavity, 40 gpm (160 L/min)
- PPJC — series 4, T-19A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Pilot ratio: 20:1
- Maximum operating pressure: 2000 psi (140 bar)
Configuration options
The letters after the base model code choose these options (shown for PPJC; a size may add or drop a choice):
- Control: B — External 4-SAE Port
- Seal material: N — Buna-N, V — Viton
Selection notes
- Maximum operating pressure is lower than spring-set valves — check the rating.
- Hydraulic setting = 20 × air pressure.
Where it is used
Pneumatically set clamping, tension and press circuits.
Installation and seal kits
Valve hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PPJCBBN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Air-Controlled Pressure Reducing/Relieving Valve |
| Series (frame sizes) | 2 to 4 |
| Cavity | T-2A, T-17A, T-19A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 20 gpm to 80 gpm (80 L/min to 320 L/min) |
| Max operating pressure | 2000 psi (140 bar) |
| Pilot ratio | 20:1 |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | B — External 4-SAE Port |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .50 lb (0,25 kg) to 3.10 lb (1,40 kg) |
Shipping & lead time
Sizes & part numbers
3 sizes- Sun Hydraulics part no.PPFC
- Series
- 2
- Cavity
- T-2A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 2000 psi / 140 bar
- Sun Hydraulics part no.PPHC
- Series
- 3
- Cavity
- T-17A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 2000 psi / 140 bar
- Sun Hydraulics part no.PPJC
- Series
- 4
- Cavity
- T-19A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 2000 psi / 140 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve (PPFC, PPHC, PPJC) and what does it do?▾
How do I read the Sun model code for the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve (PPFC, PPHC, PPJC)?▾
What sizes and flow capacities does the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve come in?▾
What pressure and setting range does the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve have?▾
Which seal and material options does the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve come with?▾
How is the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve adjusted, and which control options are offered?▾
Which seal kit fits the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve (PPFC, PPHC, PPJC)?▾
Which cavity and installation torque does the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve need?▾
Where is the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve used?▾
How does the Sun PPFC valve differ from the Sun Air-Controlled, Pilot-Operated, Pressure Reducing Valve?▾
How is the setting controlled on the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve?▾
Do you stock the Sun Air-Controlled, Pilot-Operated, Pressure Reducing/Relieving Valve in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione








