Sun Hydraulics Pilot-Operated, Pressure Reducing/Relieving Main Stage with Drilled Piston Orifice and Integral T-8A Control Cavity — PPDF8, PPFF8, PPHF8, PPJF8, Series 1 to 4

Sun Hydraulics reducing/relieving main stage with T-8A pilot cavity: PPDF8, PPFF8, PPHF8, PPJF8, series 1 to 4, 10 gpm to 80 gpm (40 L/min to 320 L/min), T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Reducing/Relieving Main Stage with T-8A Pilot Cavity
- Capacity: 10 gpm to 80 gpm (40 L/min to 320 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A, T-2A, T-17A, T-19A
- Valve function
- Reducing/Relieving Main Stage with T-8A Pilot Cavity
- Series (frame sizes)
- 1 to 4
- Cavity
- T-11A, T-2A, T-17A, T-19A
Product description
A 3-way, normally open reducing/relieving main stage with an integral T-8A pilot cavity. The pilot cartridge fitted there sets the difference between the reduced pressure at port 1 and tank at port 3; the main stage carries the full flow both ways.
Sizes and cavities
Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:
- PPDF8 — series 1, T-11A cavity, 10 gpm (40 L/min)
- PPFF8 — series 2, T-2A cavity, 20 gpm (80 L/min)
- PPHF8 — series 3, T-17A cavity, 40 gpm (160 L/min)
- PPJF8 — series 4, T-19A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for PPDF8; a size may add or drop a choice):
- Setting range: D — 25 psi (1,7 bar), W — 100 psi (7 bar)
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton
Selection notes
- The T-8A pilot cartridge is ordered separately.
- Pressure at port 3 adds one-for-one to the setting; keep it under 3,000 psi (210 bar).
- Variants add a port-4 drain, a drilled piston orifice or an open transition.
Where it is used
Remote or electro-proportional control of a reduced-pressure circuit from one cavity.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PPDF8WN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Reducing/Relieving Main Stage with T-8A Pilot Cavity |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-11A, T-2A, T-17A, T-19A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .30 lb (0,15 kg) to 3.10 lb (1,40 kg) |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm to 80 gpm (40 L/min to 320 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | D — 25 psi (1,7 bar), W — 100 psi (7 bar) |
Configuration
| Parameter | Value |
|---|---|
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.PPDF8
- Series
- 1
- Cavity
- T-11A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PPFF8
- Series
- 2
- Cavity
- T-2A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PPHF8
- Series
- 3
- Cavity
- T-17A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PPJF8
- Series
- 4
- Cavity
- T-19A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics PPDF8 cartridge valve and what does it do?▾
What does the Sun model code for the PPDF8 valve mean?▾
Which sizes and flows does the Sun PPDF8, PPFF8, PPHF8 and others valve cover?▾
What is the maximum pressure of the Sun PPDF8, PPFF8, PPHF8 and others valve?▾
What seals and coatings are offered on the Sun PPDF8, PPFF8, PPHF8 and others valve?▾
How is the setting of the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Drilled Piston Orifice and Integral T-8A Control Cavity chosen?▾
Which seal kit do I need for the Sun PPDF8 cartridge?▾
How do I install the Sun PPDF8, PPFF8, PPHF8 and others cartridge valve?▾
Where is the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Drilled Piston Orifice and Integral T-8A Control Cavity used?▾
How does the Sun PPDF8 valve differ from the Sun Pilot-Operated, Pressure Reducing Main Stage with Drilled Piston Orifice and Integral T-8A Control Cavity?▾
What goes in the T-8A cavity on the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Drilled Piston Orifice and Integral T-8A Control Cavity?▾
Do you stock the Sun Pilot-Operated, Pressure Reducing/Relieving Main Stage with Drilled Piston Orifice and Integral T-8A Control Cavity?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione








