Skip to content
SUN HYDRAULICSIH-SUN-PB-B8

Sun Hydraulics Pilot-Operated, Pressure Reducing Main Stage with Integral T-8A Control Cavity — PBDB8, PBFB8, PBHB8, PBJB8, Series 1 to 4

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics PBDB8 pressure reducing main stage with T-8A pilot cavity, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics PBDB8 pressure reducing main stage with T-8A pilot cavity, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics pressure reducing main stage with T-8A pilot cavity: PBDB8, PBFB8, PBHB8, PBJB8, series 1 to 4, 10 gpm to 80 gpm (40 L/min to 320 L/min), T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pressure Reducing Main Stage with T-8A Pilot Cavity
  • Capacity: 10 gpm to 80 gpm (40 L/min to 320 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A, T-2A, T-17A, T-19A
Valve function
Pressure Reducing Main Stage with T-8A Pilot Cavity
Series (frame sizes)
1 to 4
Cavity
T-11A, T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A normally open reducing main stage with its own T-8A pilot cavity machined in. Whatever T-8A pressure-control cartridge is screwed in — manual, proportional or air pilot — sets the difference between the reduced pressure at port 1 and the drain at port 3.

Sizes and cavities

Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:

  • PBDB8 — series 1, T-11A cavity, 10 gpm (40 L/min)
  • PBFB8 — series 2, T-2A cavity, 20 gpm (80 L/min)
  • PBHB8 — series 3, T-17A cavity, 40 gpm (160 L/min)
  • PBJB8 — series 4, T-19A cavity, 80 gpm (320 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for PBDB8; a size may add or drop a choice):

  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated

Selection notes

  • The pilot cartridge is chosen and ordered separately.
  • Drilled-piston-orifice versions suit punishing duty.

Where it is used

Remote or electronic control of a reduced-pressure circuit without a separate pilot body.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, EPDM: 990017014, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PBDB8WN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Performance

ParameterValue
Capacity10 gpm to 80 gpm (40 L/min to 320 L/min)
Max operating pressure5000 psi (350 bar)

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, EPDM: 990017014, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006
Weight.30 lb (0,15 kg) to 2.90 lb (1,30 kg)

Identification

ParameterValue
Valve functionPressure Reducing Main Stage with T-8A Pilot Cavity
Series (frame sizes)1 to 4
CavityT-11A, T-2A, T-17A, T-19A

Configuration

ParameterValue
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Reduzierung
fr
réducteur
es
reductor
it
riduzione
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at