Sun Hydraulics Direct-Acting, Pressure Reducing Valve — PRBR, PRDR, PRFR, PRHR, PRJR, Series 0 to 4

Sun Hydraulics direct-acting pressure reducing valve: PRBR, PRDR, PRFR, PRHR, PRJR, series 0 to 4, 5 gpm to 80 gpm (20 L/min to 320 L/min), T-163A, T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Direct-Acting Pressure Reducing Valve
- Capacity: 5 gpm to 80 gpm (20 L/min to 320 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-163A, T-11A, T-2A, T-17A, T-19A
- Valve function
- Direct-Acting Pressure Reducing Valve
- Series (frame sizes)
- 0 to 4
- Cavity
- T-163A, T-11A, T-2A, T-17A, T-19A
Product description
A direct-acting reducing cartridge takes a high supply pressure at port 2 and delivers a steady, lower pressure at port 1. A damped spool keeps it stable, so it can hold high reduced pressures.
Sizes and cavities
Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:
- PRBR — series 0, T-163A cavity, 5 gpm (20 L/min), 0-series
- PRDR — series 1, T-11A cavity, 10 gpm (40 L/min)
- PRFR — series 2, T-2A cavity, 20 gpm (80 L/min)
- PRHR — series 3, T-17A cavity, 40 gpm (160 L/min)
- PRJR — series 4, T-19A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 2 in³/min. (30 cc/min), 3 in³/min. (50 cc/min), 4 in³/min. (65 cc/min), 5 in³/min. (80 cc/min)
Configuration options
The letters after the base model code choose these options (shown for PRDR; a size may add or drop a choice):
- Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
- Setting range: A — 500 - 3000 psi (35 - 210 bar), 700 psi (50 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 200 psi (14 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, S — 25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting, W — 750 - 4500 psi (50 - 315 bar), 1000 psi (70 bar) Standard Setting
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: EPDM seals are not allowed on modifier /LH; If the modifier is /AP, the control must be C, L or O; If the modifier is /LH, the control must be C or L; If the seal is E, the control must be C,K,L or O.
Selection notes
- It has no relieving function: do not dead-end the reduced side, where pressure can creep up.
- Also useful as a normally open, restrictive compensator where a high pressure drop across an orifice is wanted.
Where it is used
Feeding a lower-pressure branch — pilot circuits, clamps, brakes — from one pump.
Installation and seal kits
Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, EPDM: 990163014, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PRDRLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Direct-Acting Pressure Reducing Valve |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-163A, T-11A, T-2A, T-17A, T-19A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 5 gpm to 80 gpm (20 L/min to 320 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 500 - 3000 psi (35 - 210 bar), 700 psi (50 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 200 psi (14 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, S — 25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting, W — 750 - 4500 psi (50 - 315 bar), 1000 psi (70 bar) Standard Setting |
| Max leakage | 2 in³/min. (30 cc/min), 3 in³/min. (50 cc/min), 4 in³/min. (65 cc/min), 5 in³/min. (80 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990163007, EPDM: 990163014, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, EPDM: 990202014, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .30 lb (0,15 kg) to 3.10 lb (1,40 kg) |
Shipping & lead time
Sizes & part numbers
5 sizes- Sun Hydraulics part no.PRBR
- Description
- 0-Series
- Series
- 0
- Cavity
- T-163A
- Capacity
- 5 gpm / 20 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PRDR
- Description
- Standard
- Series
- 1
- Cavity
- T-11A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PRFR
- Description
- Standard
- Series
- 2
- Cavity
- T-2A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PRHR
- Description
- Standard
- Series
- 3
- Cavity
- T-17A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PRJR
- Description
- Standard
- Series
- 4
- Cavity
- T-19A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Direct-Acting, Pressure Reducing Valve (PRBR, PRDR, PRFR and others) and what does it do?▾
How do I read the Sun model code for the Sun Direct-Acting, Pressure Reducing Valve (PRBR, PRDR, PRFR and others)?▾
What sizes and flow capacities does the Sun Direct-Acting, Pressure Reducing Valve come in?▾
What pressure and setting range does the Sun Direct-Acting, Pressure Reducing Valve have?▾
Which seal and material options does the Sun Direct-Acting, Pressure Reducing Valve come with?▾
How is the Sun Direct-Acting, Pressure Reducing Valve adjusted, and which control options are offered?▾
Which seal kit fits the Sun Direct-Acting, Pressure Reducing Valve (PRBR, PRDR, PRFR and others)?▾
Which cavity and installation torque does the Sun Direct-Acting, Pressure Reducing Valve need?▾
Where is the Sun Direct-Acting, Pressure Reducing Valve used?▾
How does the Sun Direct-Acting, Pressure Reducing Valve differ from the Sun Direct-Acting, Pressure Reducing/Relieving Valve?▾
Reducing valve or reducing/relieving valve — what is the difference on the Sun Direct-Acting, Pressure Reducing Valve?▾
Is the Sun Direct-Acting, Pressure Reducing Valve in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione








