Sun Hydraulics Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition — PRDL

Sun Hydraulics electro-proportional reducing/relieving valve: PRDL, series 1, 5 gpm (20 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Electro-Proportional Reducing/Relieving Valve
- Capacity: 5 gpm (20 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A
- Valve function
- Electro-Proportional Reducing/Relieving Valve
- Series (frame sizes)
- 1
- Cavity
- T-11A
Product description
A direct-acting reducing/relieving cartridge set by a proportional solenoid. The coil current sets the reduced pressure at port 1; if port 1 rises above it, the valve relieves to tank at port 3. Most versions are closed in the transition between reducing and relieving, so they use very little oil.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- PRDL — series 1, T-11A cavity, 5 gpm (20 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 20 in³/min. (330 cc/min)
Configuration options
The letters after the base model code choose these options (shown for PRDL; a size may add or drop a choice):
- Control: M — Manual Override (Standard), E — Twist (Extended) Manual Override, L — Standard Screw Adjustment, X — No Manual Override
- Seal material: N — Buna-N, V — Viton, E — EPDM
Option rules: If the coil is in this group (HN24AA, HN24AB), the control must be M or X; If the seal is E, the control must be E,L,M or X.
Selection notes
- Standard versions rise with current; 'high setting with no command' versions fall with current.
- Variants add a port-4 drain, an open transition or 740-Series coils; the coil is an ordering option.
- Use a driver with current control and dither.
Where it is used
Electronic pilot-pressure control of mobile and industrial valves, clutches, brakes and pump displacement.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990511007, Viton: 990511006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PRDLMDN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 5 gpm (20 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 20 in³/min. (330 cc/min) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Electro-Proportional Reducing/Relieving Valve |
| Series (frame sizes) | 1 |
| Cavity | T-11A |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | M — Manual Override (Standard), E — Twist (Extended) Manual Override, L — Standard Screw Adjustment, X — No Manual Override |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990511007, Viton: 990511006 |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.PRDL
- Series
- 1
- Cavity
- T-11A
- Capacity
- 5 gpm / 20 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition (PRDL) and what does it do?▾
How do I read the Sun model code for the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition (PRDL)?▾
What sizes and flow capacities does the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition come in?▾
What pressure and setting range does the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition have?▾
Which seal and material options does the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition come with?▾
How is the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition adjusted, and which control options are offered?▾
Which seal kit fits the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition (PRDL)?▾
Which cavity and installation torque does the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition need?▾
Where is the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition used?▾
How does the Sun PRDL valve differ from the Sun Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition?▾
What do I need to drive the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition?▾
Is the Sun Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione








