Skip to content
SUN HYDRAULICSIH-SUN-PB-C

Sun Hydraulics Air-Controlled, Pilot-Operated, Pressure Reducing Valve — PBFC, PBHC, PBJC, Series 2 to 4

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics PBJC air-controlled pressure reducing valve, series 4, T-19A cavity — dimension drawing
VIEW 01·Sun Hydraulics PBJC air-controlled pressure reducing valve, series 4, T-19A cavity — dimension drawing
1 / 3

Sun Hydraulics air-controlled pressure reducing valve, 20:1 pilot ratio: PBFC, PBHC, PBJC, series 2 to 4, 20 gpm to 80 gpm (80 L/min to 320 L/min), T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Air-Controlled Pressure Reducing Valve
  • Capacity: 20 gpm to 80 gpm (80 L/min to 320 L/min)
  • Max operating pressure: 2000 psi (140 bar)
  • Cavity: T-2A, T-17A, T-19A
Valve function
Air-Controlled Pressure Reducing Valve
Series (frame sizes)
2 to 4
Cavity
T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated reducing cartridge set by compressed air on a diaphragm instead of a spring. Air enters at the hex end, and the reduced hydraulic pressure at port 1 follows it at a fixed 20:1 ratio.

Sizes and cavities

Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:

  • PBFC — series 2, T-2A cavity, 20 gpm (80 L/min)
  • PBHC — series 3, T-17A cavity, 40 gpm (160 L/min)
  • PBJC — series 4, T-19A cavity, 80 gpm (320 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 20:1
  • Maximum operating pressure: 2000 psi (140 bar)

Configuration options

The letters after the base model code choose these options (shown for PBJC; a size may add or drop a choice):

  • Control: B — External 4-SAE Port
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Maximum operating pressure is lower than spring-set valves — check the rating.
  • Hydraulic setting = 20 × air pressure.

Where it is used

Clamping, tensioning and pressing circuits set from a pneumatic regulator or panel.

Installation and seal kits

Valve hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PBJCBBN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionAir-Controlled Pressure Reducing Valve
Series (frame sizes)2 to 4
CavityT-2A, T-17A, T-19A

Performance

ParameterValue
Capacity20 gpm to 80 gpm (80 L/min to 320 L/min)
Max operating pressure2000 psi (140 bar)
Pilot ratio20:1

Configuration

ParameterValue
Control / adjustmentB — External 4-SAE Port
Seal materialN — Buna-N, V — Viton

Installation

ParameterValue
Valve hex size1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006
Weight.60 lb (0,30 kg) to 2.90 lb (1,30 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Reduzierung
fr
réducteur
es
reductor
it
riduzione
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at