Solid Thimble, Type K3

Solid Thimble, Type K3, in 6 sizes. Indus part numbers.
Key features
- Product type: Solid Thimble, Type K3
- Size range: Marking 40/5 to Marking 80/11
Product description
Solid thimble (Type K3) for wire rope eyes.
Sizes
6 sizes, from Marking 40/5 to Marking 80/11. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
No load rating is published for this item. We confirm the rating with the quotation; do not load it until you have that rating in writing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain or wire size the connector joins, the load you need and the certificate required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Solid Thimble, Type K3 |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | Marking 40/5 to Marking 80/11 |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-MR-CN-TK3-40-5
- Size
- Marking 40/5
- A (mm)
- 127
- B (mm)
- 110
- C (mm)
- 65
- D (mm)
- 100
- E (mm)
- 6
- F (mm)
- 20
- G (mm)
- 40
- H (mm)
- 22
- Weight (kg)
- 0.97
- Indus part no.IH-MR-CN-TK3-48-6
- Size
- Marking 48/6
- A (mm)
- 152
- B (mm)
- 120
- C (mm)
- 75
- D (mm)
- 130
- E (mm)
- 7
- F (mm)
- 24
- G (mm)
- 48
- H (mm)
- 22
- Weight (kg)
- 1.55
- Indus part no.IH-MR-CN-TK3-56-7
- Size
- Marking 56/7
- A (mm)
- 178
- B (mm)
- 140
- C (mm)
- 85
- D (mm)
- 142
- E (mm)
- 8
- F (mm)
- 28
- G (mm)
- 56
- H (mm)
- 22
- Weight (kg)
- 2.4
- Indus part no.IH-MR-CN-TK3-64-8
- Size
- Marking 64/8
- A (mm)
- 203
- B (mm)
- 170
- C (mm)
- 105
- D (mm)
- 165
- E (mm)
- 10
- F (mm)
- 32
- G (mm)
- 64
- H (mm)
- 25
- Weight (kg)
- 4
- Indus part no.IH-MR-CN-TK3-72-9
- Size
- Marking 72/9
- A (mm)
- 229
- B (mm)
- 190
- C (mm)
- 110
- D (mm)
- 180
- E (mm)
- 12
- F (mm)
- 36
- G (mm)
- 72
- H (mm)
- 25
- Weight (kg)
- 6
- Indus part no.IH-MR-CN-TK3-80-11
- Size
- Marking 80/11
- A (mm)
- 279
- B (mm)
- 230
- C (mm)
- 145
- D (mm)
- 225
- E (mm)
- 12
- F (mm)
- 44
- G (mm)
- 88
- H (mm)
- 25
- Weight (kg)
- 9.05
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Solid Thimble, Type K3 and what is it used for?▾
Which sizes of Solid Thimble, Type K3 are available?▾
How do I choose the right size of Solid Thimble, Type K3?▾
What is the working load limit of the Solid Thimble, Type K3?▾
What do I send to get a quote for the Solid Thimble, Type K3?▾
How does the Solid Thimble, Type K3 compare with the Solid Thimble, Type K3B?▾
Are the dimensions in the Solid Thimble, Type K3 size table exact?▾
What certificate comes with the Solid Thimble, Type K3?▾
What does the Solid Thimble, Type K3 connect to?▾
How should the Solid Thimble, Type K3 be inspected and installed?▾
Where is the Solid Thimble, Type K3 used?▾
Does Indus stock the Solid Thimble, Type K3 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Offshore mooring components: H-links, pear links, triangle plates, LTM shackles and swivels
A mooring line is chain, wire or rope joined by connectors, each one rated to the line’s grade. What the H-link, pear link and pear shackle, triangle plate, LTM joining and end shackles, installation links, swivels and chasers do, and where each sits in a mooring leg.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read








