JIC Male 37° Cone Hose Fitting

Straight hose fitting with JIC male 37° cone — direct seal into JIC female 37° ports on cylinders, valve manifolds, and pump housings. straight, UN/UNF (7/16-20 to 1-5/8-12 — common sizes), 37° cone seat (JIC).
Key features
- Fitting Configuration: straight
- Thread Form: UN/UNF (7/16-20 to 1-5/8-12 — common sizes)
- Sealing Form: 37° cone seat (JIC)
- Nominal Size Range: -04 to -24
- Fitting Configuration
- straight
- Thread Form
- UN/UNF (7/16-20 to 1-5/8-12 — common sizes)
- Sealing Form
- 37° cone seat (JIC)
- Nominal Size Range
- -04 to -24
Product description
The JIC Male 37° Cone Hose Fitting is a straight hydraulic hose fitting in the JIC 37° family — male thread with 37° cone seat (JIC) sealing form. Compliant with SAE J514, ISO 8434-2.
Construction
- Configuration: straight
- Thread form: UN/UNF (7/16-20 to 1-5/8-12 — common sizes)
- Sealing form: 37° cone seat (JIC)
- Gender: male
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- SAE J514
- ISO 8434-2
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | UN/UNF (7/16-20 to 1-5/8-12 — common sizes) |
| Sealing Form | 37° cone seat (JIC) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -24 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2 |
Shipping & lead time
Sizes & part numbers
26 sizes- Indus part no.IH-JIC-MAL-37-0304
- Hose bore
- -03 · 3/16" · DN5
- Size
- 7/16"×20
- S1 (mm)
- 12
- A (mm)
- 26
- C (mm)
- 14
- Indus part no.IH-JIC-MAL-37-0404
- Hose bore
- -04 · 1/4" · DN6
- Size
- 7/16"×20
- S1 (mm)
- 12
- A (mm)
- 26.5
- C (mm)
- 14
- Indus part no.IH-JIC-MAL-37-0405
- Hose bore
- -04 · 1/4" · DN6
- Size
- 1/2"×20
- S1 (mm)
- 14
- A (mm)
- 26.5
- C (mm)
- 14
- Indus part no.IH-JIC-MAL-37-0406
- Hose bore
- -04 · 1/4" · DN6
- Size
- 9/16"×18
- S1 (mm)
- 17
- A (mm)
- 26.5
- C (mm)
- 14.1
- Indus part no.IH-JIC-MAL-37-0505
- Hose bore
- -05 · 5/16" · DN8
- Size
- 1/2"×20
- S1 (mm)
- 14
- A (mm)
- 26.5
- C (mm)
- 14
- Indus part no.IH-JIC-MAL-37-0506
- Hose bore
- -05 · 5/16" · DN8
- Size
- 9/16"×18
- S1 (mm)
- 17
- A (mm)
- 26.5
- C (mm)
- 14.1
- Indus part no.IH-JIC-MAL-37-0605
- Hose bore
- -06 · 3/8" · DN10
- Size
- 1/2"×20
- S1 (mm)
- 17
- A (mm)
- 26.5
- C (mm)
- 14
- Indus part no.IH-JIC-MAL-37-0606
- Hose bore
- -06 · 3/8" · DN10
- Size
- 9/16"×18
- S1 (mm)
- 17
- A (mm)
- 26.5
- C (mm)
- 14.1
Show all 26 sizesShow fewer sizes
- Indus part no.IH-JIC-MAL-37-0608
- Hose bore
- -06 · 3/8" · DN10
- Size
- 3/4"×16
- S1 (mm)
- 22
- A (mm)
- 31.5
- C (mm)
- 16.7
- Indus part no.IH-JIC-MAL-37-0610
- Hose bore
- -06 · 3/8" · DN10
- Size
- 7/8"×14
- S1 (mm)
- 24
- A (mm)
- 32
- C (mm)
- 19.3
- Indus part no.IH-JIC-MAL-37-0808
- Hose bore
- -08 · 1/2" · DN12
- Size
- 3/4"×16
- S1 (mm)
- 22
- A (mm)
- 32
- C (mm)
- 16.7
- Indus part no.IH-JIC-MAL-37-0810
- Hose bore
- -08 · 1/2" · DN12
- Size
- 7/8"×14
- S1 (mm)
- 24
- A (mm)
- 34.3
- C (mm)
- 19.3
- Indus part no.IH-JIC-MAL-37-0812
- Hose bore
- -08 · 1/2" · DN12
- Size
- 1.1/16"×12
- S1 (mm)
- 27
- A (mm)
- 39
- C (mm)
- 21.9
- Indus part no.IH-JIC-MAL-37-1010
- Hose bore
- -10 · 5/8" · DN16
- Size
- 7/8"×14
- S1 (mm)
- 24
- A (mm)
- 35.5
- C (mm)
- 19.3
- Indus part no.IH-JIC-MAL-37-1012
- Hose bore
- -10 · 5/8" · DN16
- Size
- 1.1/16"×12
- S1 (mm)
- 27
- A (mm)
- 40
- C (mm)
- 21.9
- Indus part no.IH-JIC-MAL-37-1014
- Hose bore
- -10 · 5/8" · DN16
- Size
- 1.3/16"×12
- S1 (mm)
- 32
- A (mm)
- 41.5
- C (mm)
- 22.6
- Indus part no.IH-JIC-MAL-37-1212
- Hose bore
- -12 · 3/4" · DN20
- Size
- 1.1/16"×12
- S1 (mm)
- 27
- A (mm)
- 40
- C (mm)
- 21.9
- Indus part no.IH-JIC-MAL-37-1214
- Hose bore
- -12 · 3/4" · DN20
- Size
- 1.3/16"×12
- S1 (mm)
- 32
- A (mm)
- 40.6
- C (mm)
- 22.6
- Indus part no.IH-JIC-MAL-37-1216
- Hose bore
- -12 · 3/4" · DN20
- Size
- 1.5/16"×12
- S1 (mm)
- 36
- A (mm)
- 42.5
- C (mm)
- 23.1
- Indus part no.IH-JIC-MAL-37-1612
- Hose bore
- -16 · 1" · DN25
- Size
- 1.1/16"×12
- S1 (mm)
- 30
- A (mm)
- 41
- C (mm)
- 21.9
- Indus part no.IH-JIC-MAL-37-1616
- Hose bore
- -16 · 1" · DN25
- Size
- 1.5/16"×12
- S1 (mm)
- 36
- A (mm)
- 43.5
- C (mm)
- 23.1
- Indus part no.IH-JIC-MAL-37-1620
- Hose bore
- -16 · 1" · DN25
- Size
- 1.5/8"×12
- S1 (mm)
- 46
- A (mm)
- 46.5
- C (mm)
- 24.3
- Indus part no.IH-JIC-MAL-37-2020
- Hose bore
- -20 · 1.1/4" · DN32
- Size
- 1.5/8"×12
- S1 (mm)
- 46
- A (mm)
- 47.5
- C (mm)
- 24.3
- Indus part no.IH-JIC-MAL-37-2024
- Hose bore
- -20 · 1.1/4" · DN32
- Size
- 1.7/8"×12
- S1 (mm)
- 50
- A (mm)
- 53
- C (mm)
- 27.5
- Indus part no.IH-JIC-MAL-37-2424
- Hose bore
- -24 · 1.1/2" · DN40
- Size
- 1.7/8"×12
- S1 (mm)
- 50
- A (mm)
- 53
- C (mm)
- 27.5
- Indus part no.IH-JIC-MAL-37-3232
- Hose bore
- -32 · 2" · DN50
- Size
- 2.1/2"×12
- S1 (mm)
- 65
- A (mm)
- 62
- C (mm)
- 33.9
S1 — Dimension S1 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the JIC Male 37° Cone Hose Fitting used for?▾
How do I read the part number IH-JIC-MAL-37-1010 on the JIC Male 37° Cone Hose Fitting?▾
What sizes does the JIC Male 37° Cone Hose Fitting come in?▾
How do I choose the right size of JIC Male 37° Cone Hose Fitting?▾
What is the working pressure of the JIC Male 37° Cone Hose Fitting?▾
What material and finish does the JIC Male 37° Cone Hose Fitting have?▾
Does the JIC Male 37° Cone Hose Fitting meet SAE J514, and what documents are available?▾
Which mating parts fit the JIC Male 37° Cone Hose Fitting?▾
How should the JIC Male 37° Cone Hose Fitting be installed?▾
How does the JIC Male 37° Cone Hose Fitting differ from the JIC Male 37° Cone Long Hose Fitting?▾
Where is the JIC Male 37° Cone Hose Fitting made, and can you export it from Dubai?▾
Is the JIC Male 37° Cone Hose Fitting available ex-stock from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade JIC Außengewinde 37° Bördel Schlaucharmatur
- fr
- mâle JIC cône 37° embout de flexible
- es
- macho JIC cono 37° racor de manguera
- it
- maschio JIC cono 37° raccordo per tubo flessibile
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read







